RESOLUTE by hayashi-san!

[Flash 251,509]

2 minutes ago, edwardlj said:

some fabric coming out of the rivets? same with 711

No the outer edge of the copper rivet has a small lip 

[edwardlj 63]

18 hours ago, beautiful_FrEaK said:

And more info on the 714

https://senken.co.jp/posts/resolute-230214

Here it sounds it it's very wide at the hips, we will see. Still not sure I gonna pick up a pair.

yes, comparing to the brand's other models, it has more room around the crotch, i guess. but it is a Resolute after all, have a look at this pic.

[edwardlj 63]

and i like the shape of the back pockets, so free style~~~

 

[edwardlj 63]

4 minutes ago, Flash said:

No the outer edge of the copper rivet has a small lip 

gotcha

[edwardlj 63]

and the leather patch curls up at the bottom too, differs from 711's

[blooming 100]

Some progress shots of my 710s as they dry outside on this windy day in SoCal. Worn 6-7 days a week, washed weekly. Tracks and roping are coming in nicely, and the all-over fades are a vibrant, almost electric blue now.

 

[edwardlj 63]

sent to the taylor to move the red tab 

Edited February 27 by edwardlj

[edwardlj 63]

[edwardlj 63]

just happened to know Denime had done WWII model before. 714 is based on that mostly, 40s wide belt loops, stitch on coin pocket, buttons etc..

[beautiful_FrEaK 1,675,612]

@edwardljCheck the Denime thread  Yes, the details are identically I would say. You can say Hayashi-san was so sure he got the WW2 perfect that he did it like with Denime again...or he was just being lazy  

Edited March 1 by beautiful_FrEaK

[nachobarro 3]

Hi there! I’m about to order a pair of 710’s but I’m quite confused with the sizing, measurements seem to vary between retailers…

I usually wear sizes 31 or 32 waist in most brands and my best fitting pair of jeans (vintage 501’s) measure 42,5/43cm in waist, 30 rise and 20 leg opening, should I grab size 33 or 34? Inseam length should be around 75cm.

 

thanks and have a good night

[blooming 100]

Depends on how you want them to fit. I have both 33 and 34 of the 710. I wear the 33 more regularly, but both sizes fit, obviously the 34 being a bit more roomy in the waist/hips/thighs. Seems if you are looking to replicate the fit of your vintage 501s, the 34 might be a better fit for you.

[nachobarro 3]

10 hours ago, blooming said:

Depends on how you want them to fit. I have both 33 and 34 of the 710. I wear the 33 more regularly, but both sizes fit, obviously the 34 being a bit more roomy in the waist/hips/thighs. Seems if you are looking to replicate the fit of your vintage 501s, the 34 might be a better fit for you.

Thanks for your answer, I'm asking because sizing charts seems to be all over the place

https://www.fransboonestore.com/products/copy-of-resolute-710-rinsed?variant=30936653201488 --> size 34/32 waist measures 40,5cm

https://www.brogueshop.com/products/resolute-slim-straight-one-washed-denim-711?pr_prod_strat=use_description&pr_rec_id=ba59340eb&pr_rec_pid=6783004246103&pr_ref_pid=4446690803799&pr_seq=uniform --> here it shows 43cm waist, it seems to be an official resolute size chart.

https://bears-tokyo.myshopify.com/products/resolute-リゾルト-710-66type-タイトストレート?variant=34160451158075 --> and in Bears it measures 41,5cm, and I'm going to order them from here.

so yeah, if you think both will fit me I think I prefer a less slim fit overall ;)

[indigoeagle 960]

My experience is, that the 710 fit relatively small. While I have a number of jeans in sizes 32-34 (most in 34), I had to get these in 36.

[xchen 571,685]

@nachobarro I think you and I are about the same size. I ended up going for a 33 from Bears and it was slim as I'd want to go on day one - that has broken into a perfect fit.

To be more precise I got a 33x33 and I'd say, without having measured it, I think it was actually about 31x31.

[blooming 100]

Yeah, I mostly wear size 31 or 32 in other cuts, but the 710 fits me on the slim side in 33. 

 

My 33x33 arrived with a 31.5" waist and about 30.5" inseam. 

[edwardlj 63]

i think the reason why measurements are different from retailers is because they measure the waist differently. some just lay the jeans flat, and measure from left to right ends and times 2. some would align the edges of the front and back and pull tight (with button-up) to get the maximum circumference of the waist..

[nachobarro 3]

Thanks for all of your answers!

In your experiences do they tend to shrink in length? Not sure if I should get length 32 or 33 (they are actually more like 30 and 31)

Have a nice day, Ignacio

[indigoeagle 960]

Does anyone know more about Far East Manufacturing?

Similar to Resolute they offer a classic Oxford BD shirt in a number of combinations of neck sizes and sleeve lengths.
Resolute's Hayashi-san seems to cooperate with them or is perhaps involved?

[blooming 100]

@nachobarro I'm 6' tall with fairly long legs for my frame, and length 33 lets me do a small single cuff (1") or no cuff with no break (the same overall look you'll see on any of Hayashi's style photos on resolute.jp)

[mrman 451]

If anyone is looking for a pair of off-white 710s they are available for preorder at Frans Boone

[xchen 571,685]

^ I look forward to an influx of them into the 2nd hand marketplace in the near future!

[Depth 0]

Hey! I recently got a pair of 710s and been wearing em for approx 2 weeks. They have been washed twice in an attempt to remove some harder fold marks when it was arrived to me but to no avail. You guys have any recommendations to remove these creases? In my experience also wearing them consistently does not get them out.

[beautiful_FrEaK 1,675,612]

Iron them?

[Lendo 1,901,739]

14 hours ago, beautiful_FrEaK said:

Iron them?

I second this. I've done this with a few pairs of jeans, will usually do so inside out while they're still wet or use a spray bottle to soak the crease and go from there.