CHIBA D.I.Y. SPRAWL

[Marw]

[Marw]

I realize this has been asked several times before, but I can't seem to find the answer I'm looking for.

I were about to order a bunch of these(se pic) from Fun Fabric when I realized they don't send them outside of Germany. Could anyone point me in the right direction or help me out?

[danii]

itw has an alternative

[mariahscarry]

7 hours ago, danii said:

itw has an alternative

unable to locate on ITW's website or distributors.

[danii]

@mariahscarry my bad, mistaken it with duraflex http://www.duraflexgroup.com/productDetail.aspx?id=370&sort=backpack

[danii]

@techoriginal (and of course the Errolsson) inspired me to make a xpac POPCORNæ container with some tec-sys. 

DISCLAIMER: do not start the trolling here, but you are free to express how my work is a rip-off. Thank you.

 

Edited October 3, 2017 by danii

[barto]

needs a DEEP BUTTERæ port towards the bottom 

[l999l.x]

@danii too sick man , make an xpac one haha . And btw what’s a good website too obtain Xpac in the US ? 

[chris_n]

^ um i'm not sure what pic you're seeing but it's clearly xpac, and in the text he says it's xpac. are u a bot?

[l999l.x]

Shit sorry haha didn’t see that , and no not a bot ya bish 

[danii]

ΛOKU™ INNOVATIOIN LABS: THREE FINGER TEC-SYS RING

[danii]

very littly DIY today

[99103]

This may be a silly question but anyone have an idea of what type of nylon webbing acrnm uses? Been looking around for nylon webbing to use for straps and I can't find an olive deep enough to my liking.  

[two4i6]

The buckles are working well. Starting to build my own 3A bag. Anyone know where can I get the TEC-SYS webbing? And that shining black x-pac fabric?

Edited November 8, 2017 by two4i6

[twistedtrees]

On 11/7/2017 at 4:26 PM, two4i6 said:

The buckles are working well. Starting to build my own 3A bag. Anyone know where can I get the TEC-SYS webbing? And that shining black x-pac fabric?

http://www.cascadecraftworks.com/?category=Fabric

[99103]

On 11/7/2017 at 5:26 PM, two4i6 said:

The buckles are working well. Starting to build my own 3A bag. Anyone know where can I get the TEC-SYS webbing? And that shining black x-pac fabric?

where did you get the olive quick release buckles?

[danii]

they look like they were ripped from J45M-BW (you can still see the loose threads)

[robbatussin]

8 hours ago, danii said:

they look like they were ripped from J45M-BW (you can still see the loose threads)

Harvested from flecktarn pouches via ebay is more likely.

[danii]

1 hour ago, techwearcarry said:

Does this bag fit your needs? Any specific features you’d like to see? I’m designing and developing as I’m going, so any feedback would be great.

it's your bag and it should fit your needs! Good job on it!

[Flexerino]

https://item.taobao.com/item.htm?spm=a230r.1.14.113.6546e22cP2pBv7&id=560938153997&ns=1&abbucket=16#detail

 

The female part of the quick release buckles. Planning on ordering though some proxy/shipping helper website thing since i dont know chinese. Cheaper if you order bulk. Anyone keen for a few if i order like 100 or more?

Edited November 23, 2017 by Flexerino

[Flexerino]

Looking to but some tecsys but dont really need a kilometer of the stuff. Does anyone have a few meters for sale? Would be eternally grateful

[strikethrough]

Wondering what people's preferred method of printing/transferring graphics onto webbing is? I did a couple quick searches but I'm not finding anything helpful.

[danii]

My contribution to the TWG discord DIY challenge #1 waistbag:

∆OKU AASB [AS ASYMETRIC/SO BALANCED]

–the whole belt bag design is based on the as above so below concept, there are contrasting parts that are fully symetrical

–when creating shemags there is a stripe of etaproof and polartec left. this bag is using the leftover etaproof as main material

–etaproof is not a traditional bag material, using a non-traditional bag material goes hand in hand with the concept. AASB is more like extention to one's pockets. I like to think about it as a minimal gillet, not a bag.

–shoulder pad works for both right and left shoulder wearing and both A and B side setups

–A side features 3 compartment zipper pocket with a reverse coil 10C matte sliders and 550 paracord pulls

–B side has 16 tec-sys loops in two rows

–stabilizer strap that doubles as shortening strap for waistbag mode

–patch platform and patch / patch design is an ambigram so it looks the same no matter the orientation

[AASB will be part of ƯKU:yotDOGGO collection]

Edited December 25, 2017 by danii

[segue]

On 12/1/2017 at 1:49 PM, Flexerino said:

Looking to but some tecsys but dont really need a kilometer of the stuff. Does anyone have a few meters for sale? Would be eternally grateful

are you trying to get the ones from xiamen?

[segue]

anyone know what type of elastic the 3/4 inch ones are that are used on the jacket slings?  Been looking for a thick elastic but most of them are really thin.  

[danii]

Just use non-elastic webbing, it is nice and works better for jacketsling purposes (if you are of course asking because you want your jacketsling)

[segue]

19 minutes ago, danii said:

Just use non-elastic webbing, it is nice and works better for jacketsling purposes (if you are of course asking because you want your jacketsling)

thank you for the help !!!

[Flexerino]

20 hours ago, segue said:

are you trying to get the ones from xiamen?

Yea

[EG562]

Dusting the making cobwebs off, its been a while.

Lined, with many pockets, interior dividers, and reflective bits.

Next step, get some xpac/dynema and make it better and work around some of the mistakes. 

 

Edited March 2, 2018 by EG562

[DROVES]

So I was curious to know peoples favored webbing suppliers, I just recently moved from the UK to the states and it seems like the right time to play around with different webbings. Most berry compliant milspec weaves I've found lack the more luxurious qualities I would look for and I've also been finding that some of the webbings I've found in an olive drab are dyed nylon with white cores causing fading in bent areas (for instance at the contact points of a cam lock). I'm debating if I should shell out for custom weaves or tracking down the supplier for acrnm and the like. If anyone has any insight or opinions I'd be interested to dive deaper into the world of webbing! Cheers

 

Little example of what I've been toying with here