Jump to content
rodeo bill

home-made jeans

Recommended Posts

I'm sure I remember a few people alluding to their own home-made jeans projects, and I thought it would be cool to have a thread for jeans that people have made themselves. Doesn't matter how amateur they are, and failed attempt stories are welcome too. Home-made is always best:)

Share this post


Link to post
Share on other sites

So let;s get this rolling!

Just to be clear before I start, I really admire what people like ANde Whall and Conie Jeans are doing, and I'm not trying to compete with them in any way- I've made these for myself, for fun- I haven;t got any plans to do a production run any time soon:D

I only started thinking about this on Monday, and by Thursday I'd worked out the details, ordered some denim. cut a pattern and made a fit sample- it's all gone really really quickly!

Personally I like quite a vintagey, baggy fit, and for this pair I decided to go with a hybrid of workwear-inspired detailing in a jeansy cut- loosely like early Levi's/repros. I started by tracing round my Evisu 2001, but I made it more crooked (more slanting seat and fly), widened the legs all the way down, and tapered the hips a lot. I also made a much deeper yoke, and took a lot of shape out there, so that you get quite a round seat. Here's the fit sample I made from some spare denim I had left over from a previous project:

3013693802_c761d58365.jpg

Share this post


Link to post
Share on other sites

I actually made my jeans last night. Started around 7 after work, and I was done by midnight- more productive than my average Friday night:D

Here's the pattern pieces layed out on the denim (on the floor in my sitting room- as I say this is a 100% home-made project:))

3013804714_b2d16eb660.jpg

I took a few photos in the early stages of putting them together, and I meant to properly document it, but in the end I got a bit caught up with making my jeans, so I didn't take as many photos as I'd intended...

3013805240_6f78452a13.jpg

I didn't get the denim until Friday morning, and I wanted to make them over the weekend, so I had to get the buttonholes for the fly made from slightly different denim from the rest of the jeans- but I think this is kind of a cool secret detail anyway.

3013804974_bdeb61e032.jpg

french-seamed denim pocket bags:

3013805078_e31c4c9a72.jpg

3012970077_b455704200.jpg

my sewing machine. It's a very good domestic machine, but I really could have done with an industrial one for this- it couldn;t really cope with the heavy denim, and I had a lot of trouble with snagged up thread underneath, which is a pity, but it's all part of the story:rolleyes:

3012970715_0811d583d3.jpg

Share this post


Link to post
Share on other sites

so here they are:) detail pics first:

weirdly foreshortened front flat photo (comme des garçons belt):

3012846054_7fafa9ff7b.jpg

weirdly forshortened back flat photo:

3012009795_4cd47c1004.jpg

the hip pockets are square, sewn on in one stitch, like the match pocket on Levi's/repros, and fully lined with calico (sorry to cover up the patch- it's handwritten with "MADE IN [my address] Nov 7 2008":

3012846176_1b6ca76fa4.jpg

3012009965_4f50a3db9f.jpg

3012846642_5e9c66cf80.jpg

lined beltloops:

3012846574_61a1e615f6.jpg

Narrow selvage, and double-folded hem:

3012010689_e8205b70e4.jpg

I made the hop topstitch on the right hand side into a pencil pocket by bringing it back up over the pocket and under waistband:

3012011431_7e36c458fa.jpg

Share this post


Link to post
Share on other sites

and here's how they look now:

3012847926_26fd0fa023.jpg

3012011831_dd074a2710.jpg

and fit pics:

3012011511_c75334ebd1.jpg

3012011573_3f7c5a08f2.jpg

3012847850_36313317b2.jpg

I'll get the top buttonhole put in tomorrow, and then rivets and buttons will go on next week. After that I'll give them a soak, and see how they;re going to end up. I'm really excited about them!:)

edit- I'm thinking silver or copper dome rivets (like Carharrt), and plain silver donut buttons, like wartime Levi's. Any thoughts/recommendations much appreciated!

Share this post


Link to post
Share on other sites

^^thanks! They are pretty baggy, but personally that's what I like (I know it;s not the classic sufu silhouette:D), also they should shrink a bit when I soak them.

By the way selaviso and everyone else, I'm really sorry I can;t work out how to embed my photos. I've tried eveything I can think of, and I've read the posting guides loads of times... I don;t know why I can;t do it:confused:. I'll really try to work it out though, and when I do I'll edit my posts.

Share this post


Link to post
Share on other sites

Nice looking denim, button holes on the fly are top notch. I started a small brand this past year and invested in an industrial leather and denim machine with a walking foot. It gives you a seam much like the ones see on high end japanese made pairs, where the thread protrudes over the fabric adding an extra bit of stretch. I would also recommend you invest in a hand press for setting the rivets and shanks if you plan on making more pairs, mine was about a hundred plus and it has lasted me for years now. Also if you want more longevity out of your jeans you should contact one of the major thread manufacturers and invest in some tex 90-120 thread which will give you that added bit of strength, preferably poly wrap poly core.

Share this post


Link to post
Share on other sites
edit- I'm thinking silver or copper dome rivets (like Carharrt), and plain silver donut buttons, like wartime Levi's. Any thoughts/recommendations much appreciated!

Good choices, I really like the Carhartt/Samurai USA rivets. Didn't the wartime Levi's have wreath buttons?

And this is super nitpicky, but I can't stand the look of a skinny belt in big loops. You should consider wearing a wider belt with those jeans.

Share this post


Link to post
Share on other sites

Great work +rep

edit: with flickr, you have to delete "?v=0" after each photo's link when you either use the insert picture button or tags

Share this post


Link to post
Share on other sites
Nice looking denim, button holes on the fly are top notch. I started a small brand this past year and invested in an industrial leather and denim machine with a walking foot. It gives you a seam much like the ones see on high end japanese made pairs, where the thread protrudes over the fabric adding an extra bit of stretch. I would also recommend you invest in a hand press for setting the rivets and shanks if you plan on making more pairs, mine was about a hundred plus and it has lasted me for years now. Also if you want more longevity out of your jeans you should contact one of the major thread manufacturers and invest in some tex 90-120 thread which will give you that added bit of strength, preferably poly wrap poly core.

thanks very much firstdoor- that's really helpful advice:)

to be honest this really is just a one-off project for my own fun, but you're absolutely right, if i was going to take this further i'd definitely need a more serious sewing machine (although personally I like single-needle construction done well), a proper bartack machine, and a rivetter.

regarding thread, I originally bought some gutterman 90 poly thread, but it didn;t go through my machine very well at all, and I do like cotton for the wear it develops. In the end I went for 50, which was the thickest I could easily find. Doing it again I think I'd go for 70-90 100% cotton.

I'd be really interested to see your product here if you can find time to post:o

Share this post


Link to post
Share on other sites
^^thanks! They are pretty baggy, but personally that's what I like (I know it;s not the classic sufu silhouette:D), also they should shrink a bit when I soak them.

By the way selaviso and everyone else, I'm really sorry I can;t work out how to embed my photos. I've tried eveything I can think of, and I've read the posting guides loads of times... I don;t know why I can;t do it:confused:. I'll really try to work it out though, and when I do I'll edit my posts.

use photobucket. they give you the code for posting on forums.

Share this post


Link to post
Share on other sites
Great work +rep

edit: with flickr, you have to delete "?v=0" after each photo's link when you either use the insert picture button or tags

YES!!!! thanks so much- I really appreciate your help. +rep for sure

now I have to go back and edit all my posts:D

Share this post


Link to post
Share on other sites

now I'm putting the photos in properly I can only do 10 per post- here's the rest of the detail shots:o

so here they are:) detail pics first:

triple-stitched seat seam (all the threads are white 'Atlas' 100% cotton. Apparently Atlas is no longer available, spun in England, which is extra cool as I just happened to have ot lying atround at home:D. Obviuosly it's all single-needle sewing, because I don;t have an overlocker, let alone a run-and-fell machine...

3012846722_5bfc502db4.jpg

3012011069_e88220a8ec.jpg

Share this post


Link to post
Share on other sites

selvage waistband:

3012846300_c2eeb4de79.jpg

3012846428_6bfccc61ed.jpg

3012847048_0bca283c8e.jpg

3012010977_51389aeb9f.jpg

the fly is the trickiest bit for me. this was the first time I really got it right I think:

3012847528_2c27d1c234.jpg

3012010849_a15d0cfbed.jpg

Triple-stitched slanted front pockets. the stitch you can see up the pocket facing is the run-off sewing line from putting the kuroki label onto the pocket bag:

3012846518_d49ab58957.jpg

3012846896_d461587f59.jpg

Share this post


Link to post
Share on other sites
Good choices, I really like the Carhartt/Samurai USA rivets. Didn't the wartime Levi's have wreath buttons?

And this is super nitpicky, but I can't stand the look of a skinny belt in big loops. You should consider wearing a wider belt with those jeans.

thanks very much! I think I'm right in saying that wartime levi's fly buttons were plain donut, and the top one was a victory wreath? that's what I'd like to go with- I'm pretty sure I can find the plain fly buttons but I donlt know if i'll be able to get the wreath button- I'll keep you posted:D

totally with you on the belt. I'm only wearing that belt on the jeans in these photos because there aren;t any buttons yet, so the jeans'd fall off without one, and that was the first belt that came to hand. Once they;re finished and soaked I'll post proper outfit fit pics!

Share this post


Link to post
Share on other sites

^^ I'm really sorry, but Kuroki only do wholesale really, I'm just friends with a guy who works for them and he helped me out. I paid 30pounds for 4m, but i think a lot of that was the DHL from Japan to UK...

Share this post


Link to post
Share on other sites

I have some denim.

I think I had 6 meters from Nisshinbo, but I'll check.

Share this post


Link to post
Share on other sites

Good stuff Bill. Nice looking house too, are you in East London?

Share this post


Link to post
Share on other sites

thanks everyone! west is best;)

I'm in Hong Kong, so buttons, rivets and post-soak fit to come next week hopefully

Share this post


Link to post
Share on other sites

those are awesome, bill! great job, although the pockets are a little too square for my liking, it's good to see a slightly different take on the vintage stuff... keep up the good work

Share this post


Link to post
Share on other sites
those are awesome, bill! great job, although the pockets are a little too square for my liking, it's good to see a slightly different take on the vintage stuff... keep up the good work

thanks! a few other people (here and in real life) have said they;re not keen on the square pockets (they are 100% square)

the thinking behind it is: I think I'm right in saying that original levi's pockets measured square (measuring top-point against edge-to-edge), so I'm working out from that, also these are kind of workwear-based, so this is a nod to headlight, big yank/john/smith, carharrt, hercules etc, which had (again I think) square pockets with rounded corners. I figured square corners are easier and more time efficient, so more authentic (plus just easier!) Finally I'm just a bit bored with all those spade pockets!

It'll be interesting to see them after they've got the metalwork and have been washed. at the moment they still seem like some bits of cloth I sewed together, and then (in my previous experience) they;ll transform into 'a pair of jeans' and I can see what I really think of them. sorry if that sounds a bit hippie:D

Share this post


Link to post
Share on other sites

^^ good job! Looks great to me, looking forward to seeing buttons and rivets (exposed back pocket rivets surely?)!

I like the big square back pockets, but how come you placed them over the yoke? Any vintage inspiration for that? Carhartt have been yoke less as far as I know, and work pants with a yoke usually have it cut more shallow.

Share this post


Link to post
Share on other sites
^^ good job! Looks great to me, looking forward to seeing buttons and rivets (exposed back pocket rivets surely?)!

I like the big square back pockets, but how come you placed them over the yoke? Any vintage inspiration for that? Carhartt have been yoke less as far as I know, and work pants with a yoke usually have it cut more shallow.

thanks superB:) The yoke thing is something I've worked on for a while. As I understand it there are 2 reasons for having a yoke- 1 is it allows you to get the jeans out of less cloth (you cut the yoke out of what's between the leg panels) and 2 is that you can put some shape into the seat (like the darts in dress trousers). If the yoke's very high then you;re either not putting any shape in (if it;s just a straight seam) or you're putting shape in at the back of the hips, which doesn;t do much good (although it can help cover your arse when you bend over (in the saddle??)). I moved it down a lot and took loads of shape out (effectivelty big darts into the seat seam and at the hip), so get quite a full seat. This is a look I like, but also it happens to suit my shape:D

yes exposed rivets- I'm not good enough for concealed yet! also then I'd have had to have done the rivets before finishing the sewing, which would have taken much longer. In fact I think expeosed'll work better here, and they;re going to be dome rivets anyway, so there's no risk of scratching my saddle!

Share this post


Link to post
Share on other sites

Good work fella.

Share this post


Link to post
Share on other sites

Really like the workwear look/baggy fit and the fabric you sourced.

+ rep!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • hello !

    supertalk is free to browse as a guest. You need to be a member to participate in discussions or buy and sell on the classifieds.

    From 2021 new membership is $US 6 / year.

    You can also become a premium superseller or supermember. Businesses who want to promote their brand and products need to become a supersponsor. superfuture is privately owned and has been online continuously for 22 years. It is a digital cockroach and will survive all current and future apocalypses.  

  • Similar Content

    • By reallypeacedoff
      View Advert APC Petit Standard Raw Indigo Denim Jeans 32
      Brand: APC
      Model: Petit Standard
      Color: Indigo
      Material: 100% cotton / raw selvedge
       
      Description: After a fresh wash, these already slightly too tight jeans for me shrank so up for sale they go
      Condition: Worn gently, plenty of life left
       
      Size 32 measurements are as follows:
      Waist: 17”
      Rise: 10”
      Back Rise: 14”
      Thigh: 11.25”
      Knee: 8.5”
      Leg Opening: 7.25”
      Inseam: 35”
       
       
      Retail Price: $225 + tax
      Shipping: $15 in USA, inquire for anywhere else
       
      Link to product on APC site: https://tinyurl.com/y5c7qgxe
      Advertiser reallypeacedoff Date 08/26/2020 Price $75.00 Category denim Brand A.P.C Actual size 34  
    • By reallypeacedoff
      Brand: APC
      Model: Petit Standard
      Color: Indigo
      Material: 100% cotton / raw selvedge
       
      Description: After a fresh wash, these already slightly too tight jeans for me shrank so up for sale they go
      Condition: Worn gently, plenty of life left
       
      Size 32 measurements are as follows:
      Waist: 17”
      Rise: 10”
      Back Rise: 14”
      Thigh: 11.25”
      Knee: 8.5”
      Leg Opening: 7.25”
      Inseam: 35”
       
       
      Retail Price: $225 + tax
      Shipping: $15 in USA, inquire for anywhere else
       
      Link to product on APC site: https://tinyurl.com/y5c7qgxe
    • By reallypeacedoff
      View Advert Iron Heart 301s-14 Raw Indigo Denim Jeans 32/36
      Brand: Iron Heart
      Model: 301s-14
      Color: Indigo
      Material: 100% cotton / raw selvedge
       
      Description: After a fresh wash, these already slightly too tight jeans for me shrank so up for sale they go.
      Condition: Worn gently, plenty of life left
       
      Size 32 measurements are as follows:
      Waist: 17”
      Rise: 10”
      Back Rise: 14.5”
      Thigh: 12”
      Knee: 8.25”
      Leg Opening: 7.25”
      Inseam: 36”
       
      Retail Price: $295 + tax
      Shipping: $15 in USA, inquire for anywhere else
       
      Link to product on Self Edge site: https://tinyurl.com/y6bsvq73
      Advertiser reallypeacedoff Date 08/26/2020 Price $125.00 Category denim Brand IRONHEART Actual size 34  
    • By reallypeacedoff
      Brand: Iron Heart
      Model: 301s-14
      Color: Indigo
      Material: 100% cotton / raw selvedge
       
      Description: After a fresh wash, these already slightly too tight jeans for me shrank so up for sale they go.
      Condition: Worn gently, plenty of life left
       
      Size 32 measurements are as follows:
      Waist: 17”
      Rise: 10”
      Back Rise: 14.5”
      Thigh: 12”
      Knee: 8.25”
      Leg Opening: 7.25”
      Inseam: 36”
       
      Retail Price: $295 + tax
      Shipping: $15 in USA, inquire for anywhere else
       
      Link to product on Self Edge site: https://tinyurl.com/y6bsvq73
    • By mlavault
      Hi,
      I wanted to share my experience with Spare jeans, a Montreal MTM jeans/jackets, family-owned, operation. I had the pleasure to meet with Prospero Rey, his wife and his kid. I'm in the process of having a jean made, so expect some updates to this post.
      First let's get the price out of the way: 200CAD + taxes for a custom pair of jeans. Very reasonable for what you get IMO.
      He only uses Japanese denim, from Kaihara, Kuroki and Nihon menpu.
      He only has a few rolls available but can order about anything from those mills, as long as he feels he can use the whole fabric roll for other customers (so probably not ultra-heavyweight, ultra-neppy or very special denim). He can only order 59 yards roll and doesn't want to waste anything.
      He doesn't seem like a fabric nut and has a very small selection in the shop, which seems fair considering the size of the operation. On the other end, he seems extremely detail-oriented on the making itself.
      He uses old sewing machines, a Mitsubishi for the chain stitches (he is looking at getting a Union Special).
      Talking with him was a pleasure, and I thought I'd give him a try and report back. I'm passionate about clothing, and wear a mix of sartorially inspired outfits, but also like to venture into workwear from time to time. I'm already familiar with high-end Japanese denim (either because I could see them first hand or try them on, or knowledge gathered from the internet) and own a few quality jeans (a Momotaro, a Blackhorselane, a couple of nudies).
      My idea was a pair of jeans inspired by vintage levis (1947). I'm not a repro fanatic, even though I like vintage-inspired clothing, so I didn't want a perfect repro (although I'm sure you could have one made if that's your thing).
      I went with a fairly high rise, straight leg fit, using a Kaihara 14.5oz denim. I chose no pattern on the pockets, copper rivets (hidden on the back pockets), button fly, striped cotton half pocket lining in the back pockets, classic white Japanese organic cotton pocket bags at the front and classic gold stitching.
      Nothing fancy, something simple and easy to wear. He showed me some pairs he made with flat felling instead of lock stitching along the inside leg seam. Everything was very clean and well made. He also showed me some denim jackets and cinch back jeans with external suspender buttons.
      It started with trying on a pair of try on pants. He didn't have any 30 sizes left so you will see me wearing a 31 on the pictures, hence the not so perfect fit. It was already quite good though and we only had to make minor adjustments to the fit. I, unfortunately, didn't take enough pictures of what he can do on the sample jeans he showed me. Some stuff is pretty funky but those are customer's demands.
      I hope this will catch your interest and will update with more pics from the making (he will send me a video) and from the finished product.
      Thanks for reading!
      Album:
      https://imgur.com/a/glW9Phq
  • Top 10 Active Viewed Topics

  • ACRONYM Khaki J1B-GT Jacket
    $US 2150

    khaki-j1b-gt-jacket.jpgshow?id=gf39VV*YhHg&bids=818443.18608285