The Flat Head

[jobesjobes]

oh ty jobes, so nice i want a pair so badddd

If I hadn't just bought a brand spanking new pair of SEXFH05BKs, I'd be all over these... These are just plain sex!

[kiya]

If I hadn't just bought a brand spanking new pair of SEXFH05BKs, I'd be all over these... These are just plain sex!

Whow, where'd you get a pair of those new?

[jobesjobes]

A dude from Toronto (riff, nice dude) bought them in size 30, never soaked them thus never got around to wearing them, fortunately the first buyer flaked so I managed to snag them for 300! They keep there value pretty well eh? Ha.

Only four were made in each size right?

By the way Kiya, the SE05BSP = best indigo jean, period!

[bfan]

damn those dual tone arcs look so nice...

[lilmarkham4]

I have a 28 waist but I went with a 29 becuase people were telling me the true to size was too tight. Hopefully it will be okay.

[jobesjobes]

Fit pick of my SE05BSP size w34l38 (35" waist)...

[LandoCal126]

did u resize the pics, the jeans look rlly rlly short

I did not resize the pics and I agree they look awful in the photo.

it could be the angle the picture was taken. either that or they were hemmed

It was a horrible angle I used to get the least amount of shadow possible but it ended up looking worse. No they are not hemmed.

@Kiya, I agree, I can finally really see the blue thread intertwined with the red. looks amazing.

I understand that Sidney take much better photos than I do but if you couldn't see both the red and blue stitching in my flicks then I would highly suggest you adjust your monitor ASAP.

[danisfake]

random shot of the bsp's with LGC belt

that electric blue is finally starting to poke its head out

[Alleyne]

I like your fit Jobesjobes!

Argh so tempted to get the Inazumas, but too much jeans in rotation...

[appfaff]

I understand that Sidney take much better photos than I do but if you couldn't see both the red and blue stitching in my flicks then I would highly suggest you adjust your monitor ASAP.

haha, I wasn't hatin on your pics lando, I thought they were really good actually. 500 times better than anything I take. I just never knew about the blue thread until I saw a close up. My fault for not readin up on them enough:D

[amnesiac]

Really nice fit Jobesjobes

[LandoCal126]

haha, I wasn't hatin on your pics lando, I thought they were really good actually. 500 times better than anything I take. I just never knew about the blue thread until I saw a close up. My fault for not readin up on them enough:D

No worries. Mine are hang drying right now post-soak...

Edit: 500th Post

[appfaff]

Can't wait to see pics. I'm pretty jealous that you got a pair. There was never really any hope for a me coppin a pair of these, ha

[LandoCal126]

My Tagged Size - W33 L36

My Measurements Pre-Soak:

Waist - 34"

Front Rise - 10.5"

Thigh - 11.25"

Knee - 8.5"

Inseam - 36.25"

Leg Opening 8.25"

My Measurements Post-Soak

Waist - 32"

Front Rise - 10.5"

Back Rise - 14"

Thigh - 10.75"

Knee - 8.25"

Inseam - 35"

Leg Opening - 8"

[Episode3]

lando you have nice writing

[LandoCal126]

lando you have nice writing

Thanks! Used a thin Sharpie but it was not as easy to get my Hand Style across on fabric.

[deminslut]

got a unsoaked sz 33 bsp for sale if anyone is interested. selfedge is all sold out!

[inyourface1]

i was wondering are 1001s slim, because it states the leg openings vary from 7.5 and greater....i tend to like skinnier like petite standards which have a leg opening like 6.75. Do you guys think the 3001/1001s are skinny enough for your taste?

Do leg openings tend to shrink in the hot wash phase?

thanks

[Hendodo]

^^they're skinny enough for my taste..

and yes they will shrink..up to .5 ( at least for my 380's)

[PeterParker]

i was wondering are 1001s slim, because it states the leg openings vary from 7.5 and greater....i tend to like skinnier like petite standards which have a leg opening like 6.75. Do you guys think the 3001/1001s are skinny enough for your taste?

Do leg openings tend to shrink in the hot wash phase?

thanks

Flat Head's XXX1 cut is a slim straight cut, so yes, they are slim. Depending on your figure, they can be sized down for a very slim fit. Make no mistake though, they are not a skinny cut, nor a tapered cut, which sounds like what you're looking for. If it's a tapered cut you're looking for, look at the BSP's, although those feature the 3XXX denim, not the 1XXX denim.

[rocco]

x-post from Workshirts

I got the Flat Head wabash work shirt, a great piece. But I find it runs really small compared to my other FH-shirts. Anybody else encountered this? I have a 40, should trade it for a 42. Anyone interested?

[YaFlatHead]

Flat Head's XXX1 cut is a slim straight cut, so yes, they are slim. Depending on your figure, they can be sized down for a very slim fit. Make no mistake though, they are not a skinny cut, nor a tapered cut, which sounds like what you're looking for. If it's a tapered cut you're looking for, look at the BSP's, although those feature the 3XXX denim, not the 1XXX denim.

Hey,

I think you got your facts a bit mixed up here. Correct me if im wrong. The 1001 does use the 3xxx denim. All the slim cuts are based off of the 3001 (which was the first slim cut that flat head came out with). Only the BSPs and the Inazuma collabs have a different slim cut.

[beatle]

The new 16oz denim used on the 1001 is the same denim that we used on the SEXFH05, and still comes packed with the fading properties that Flat Head's 3XXX denim is known for.

[ivan_kendo]

Hey,

I think you got your facts a bit mixed up here. Correct me if im wrong. The 1001 does use the 3xxx denim. All the slim cuts are based off of the 3001 (which was the first slim cut that flat head came out with). Only the BSPs and the Inazuma collabs have a different slim cut.

1001 is 16 oz denim

3001 is 14.5 oz

look it up on selfedge yourself.

[jays978]

Just purchased some SEFH's from a member. I snapped a few pics. What do you guys think of the fit? I never gone this slim before, but I can barely breathe in these! But the denim is just so godly I had to take the plunge.

[vincent0524]

^that looks good. is that post-soak?

[jays978]

^that looks good. is that post-soak?

Thanks vince. The owner pre soaked it. I don't think I can even fit them if i soaked them again.

[PeterParker]

Hey,

I think you got your facts a bit mixed up here. Correct me if im wrong. The 1001 does use the 3xxx denim. All the slim cuts are based off of the 3001 (which was the first slim cut that flat head came out with). Only the BSPs and the Inazuma collabs have a different slim cut.

Educate yourself:

http://www.flat-head.co.uk/html/styles.html

The SExFH05 was also a slim cut (modified from the XXX1 cut), but made from the 1XXX denim.

Just purchased some SEFH's from a member. I snapped a few pics. What do you guys think of the fit? I never gone this slim before, but I can barely breathe in these! But the denim is just so godly I had to take the plunge.

That looks uncomfortable. Are they SExFH BSP or SExFH05(BK)? They will stretch out if they are the latter (1XXX has quite a bit of give, BK's use the 4XXX denim), but you'll be living in pain if they are the former (3XXX not very forgiving). Either way, be prepared for premature crotchspload if you intend on wearing those.

[ssheat]

The SExFH BK was made with 4XXX denim, not 3XXX or 1XXX denim. It will definitely stretch a good bit. If you like the silhouette at this point of time, they'll definitely be fine.

[jays978]

Hey guys,

They're SEFH Indigos with 3XXX denim. Crotch blow is the sum of all my fears. I want another pair of nice FH's, but can't stand the way the pockets are cut on the frontier series. Will these stretch much?