Jump to content

Recommended Posts

Posted
you paid 100 bucks? wtf

Well, 85$ for the job and $15 for shipping. I naturally expected some top notch results. Kind of made me lose interest with these but let's see what they have to say and even though it's a let down I guess I can wear them un-cuffed.

Posted
why did you do that? pretty stupid IMO.

I don't want to destroy the leg openings by dragging them under my heels, there's no chain stitch service where I live and apart from the originally wide leg opening of the S5000s, I really like the cut and the denim. That's why.

I went through quite a few places but most couldn't do the tapering, just stitching the leg opening.

Posted
Kind of a cross post but fuck. Here's what happened to new 5000s after sending them to get tapered, paying $100 for the job and giving instructions to keep the selvedge width as close to the original as possible

How can they taper from the selvedge side and keep the selvedge width close to the same? Impossible. You just needed to tell them to use only the inner seam and to not touch the selvedge line.

Posted

wrd im contemplating on tapering my 5000's, and an inseam taper only costs $48, u spent way to much

Posted

make cut offs.

Posted
How can they taper from the selvedge side and keep the selvedge width close to the same? Impossible.

Never said they could. I also didn't ask them to do that. It seems that telling them to keep the selvedge width as close to the original was a very bad idea.

You just needed to tell them to use only the inner seam and to not touch the selvedge line.

I did. The repair instructions they wanted included a picture of jeans where I was supposed to mark the points of "repair". I marked the leg openings and the inner seam. Quite clear instructions if you ask me.

I can't fully blame them and I'll just see what they say about the misconception. Seems like I'm just going to wear them un-cuffed.

Posted

You can just get them to make the selvedge outseam normal width again and this time take it in from the inner seam, no fabric was cut away so it's easily done. Might wanna go with another tailor this time though..

Posted

Hi all,

This one here is just for verification. I ordered a pair of S710 in size 29 from 2nd (Rakuten). I took my Copper Labels Momotaro for reference, which are tagged 28 (One Wash) and measure around 29 inches at waist. They fit perfect.

Did I take the right size for the Sams?

Guest nooblet333
Posted

It should be right, just depends on your thigh..

Posted
I don't want to destroy the leg openings by dragging them under my heels, there's no chain stitch service where I live and apart from the originally wide leg opening of the S5000s, I really like the cut and the denim. That's why.

I went through quite a few places but most couldn't do the tapering, just stitching the leg opening.

But you ended up shipping them off somewhere. If you shipped them to get tapered, you probably could have shipped them somewhere to get chainstitched....no?

Posted
already ordered them. waiting so eagerly for their release.:D:D

Mate, please do put up some pics when they finally arrive, I may have to jump on a pair myself!!:cool:

Posted

I hope Yuichi already pre-ordered size 34 for me in the S5000VX24oz. So I hope I'll be onbioard with you guys.

@Piou-Piou: that is probably the most often asked question and I'm sure you would find the answer in this thread. as I don't own the APC NS, I can't really comment but I think you could look into the S710XX...

Posted

Good day gents..

will post pic my 21oz vx..after amonth of wear.some evos and this jeans stretch alot. got to hot soak,again.

Posted

hd8a00ba6.jpg

sorry for the big ass photo... photobucket's resize tool aint doing squat

earth elements.. bought around july

Posted
hi ! this is my first post so hello everybody !!!

I hope some of you can help me...

which samurai cut is similar to the APC New Standard ?

Extremely sized down 5000's

Posted

Here are my S003JP sz 33. I sized up like some of you recommended, definitely fits better in the thighs and front rise.

Here's a prewash pic, and an extra one with overalls for 'merica.

img3310z.jpg

img3317m.jpg

I'm about to wash them now, will post up pics manana!

Guest nooblet333
Posted

Good fit so far, I think it's going to be even better after the wash!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...