Jump to content

Recommended Posts

Posted
still sweatin' the "wire" belts...

thanks! They'll stay around for sure.

Here's a little bit about the new 'hook' buckle I developed for the 3rd collection.

the finished original buckle on my jeweller's bench:

6041436740_8fa57ddd05_z.jpg

and here's the idea....

I wanted to do a version of a 'plate' buckle, something like this (photo from a link in Jeans of The Old West thread, nice find by bluegoldblues, id'd by Sansome as 20s-30s:

6040895775_edc7c08b92_m.jpg6041445692_24f4be9c26_m.jpg6041446142_aa52f41e01_m.jpg

basically I wanted to use this technical concept, but without the 'decoration', the plate itself. Making this buckle system without the plate, using a single 6mm diameter wire, you get something that looks like this:

6041403484_00ee1cb449_z.jpg

the original plan was to use it exactly the same as a plate buckle, like this:

6041405706_28543f2193_z.jpg

but the problem with this (and with the original plate buckles, in my opinion), is that the bulk of the system is on the inside of the belt, pressing against you, and more importantly, the 'pin' is pressed into your jeans, so as you sit etc, you're potentially pushing against the pin and pushing it out, causing the belt to pop open:

6041408076_c2284a77f9_z.jpg

The obvious solution for this belt (of course it wouldn't work the same way if you actually had the plate on the buckle), is just to flip the whole system upside down:

6041410200_ef5f90f52b_z.jpg

the nice thing about this is that the more you press into the belt (from the inside), the more the 'pin', or hook, is pushed into the belt, making it stronger. Also the bulk of the system is now all on the outside. Finally,this type of buckle doesn't deform the leather at all, which is nice. The 'wire' and 's' buckles both bend the leather around the buckle, but this type keeps everything completely flat.

here;s the finished belt then, cut from oak bark tanned leather and this one hand dyed with logwood (photos of this a couple of pages back):

6041401384_8a561835df_z.jpg

and here's my own, this one on black stained oak bark leather, with weld-dyed type130 jeans:

6041492702_1c62ac2024_z.jpg

Posted

Very cool developmental process, William. I'm not sure how I feel about the lack of a traditional buckle, though having the pin push out from the inside is fantastic. I realize this goes against the advantage of keeping the leather flat and preserving it, but would it be possible to incorporate a "shell" or a cover that clips on or is interchangeable, so that you preserve the traditional aesthetic?

Posted

thanks! hmm.... good comments (appreciated). I'm sure a shell/cover plate would be doable, but I think you'd end up with something similar to a standard buckle only more complicated, which would kind of spoil the point. Really the plate buckle idea was just a starting point- I think it's evolved away from that to something in its own right by now, and I like how minimal it is from the outside, combined with the functionality and how easy and comfortable it is to use

Posted

The bias cut strew looks great. I love the color of the canvas fabric.

I like the minimalistic look of the hook buckle myself. It seems quite easy to get off as well....just press the pin. Any chance you will have the logwood dyed leather with hook buckle? I love how the leather aged in this pic

6041401384_8a561835df_z.jpg

Posted
The bias cut strew looks great. I love the color of the canvas fabric.

I like the minimalistic look of the hook buckle myself. It seems quite easy to get off as well....just press the pin. Any chance you will have the logwood dyed leather with hook buckle? I love how the leather aged in this pic

[/img]

thanks and thanks:) ^^that is a logwood dyed belt! and it's unworn- that is exactly how it's delivered. It's available from Unionmade SF/LA, Few & Far London, Red Wing Amsterdam, Good Well Nagano, and Comes a Time Osaka.

Posted

Received my new French Woad dyed 350 t.

1st season's English Woad vs this season's French Woad

DSC_0785.jpg

The rib cuffs not as bulky as the first season.

DSC_0784.jpg

Sofest t shirt I own. Very comfortable.

Posted

bill, are there still any of the selvedge aprons from the first season lying around?

Posted
bill, are there still any of the selvedge aprons from the first season lying around?

hmm... not sure... they went to superdenim, and Few&Far, both in the UK. You could contact them and ask. I think F&F might do.

Otherwise, depending on where you are, Nestrobe in Tokyo have just had some in their new delivery.

Posted
Received my new French Woad dyed 350 t.

The rib cuffs not as bulky as the first season.

Sofest t shirt I own. Very comfortable.

Thanks for posting pics! Look great on you:) yeah the colour on this batch is beautiful- I'm really happy with it. If people would like I'll put up some photos of my new pair of woad dyed 132s, which I got this week.

On the cuffs- it's the same 100% cotton rib it's always been- I've been getting a little more organized with pressing Ts before they go out- that's probably all it is!

Posted

woad dyed type 132, these are just finished, and have been delivered (also type 130) to stores- they should start appearing any day now.

I sized up one on these, to a size 5 (36"). I'm feeling baggy as we come into autumn:rolleyes:

6055710300_7cd343bc03_z.jpg

6055161847_1a79b05e30_z.jpg

and worn, with a black oak bark leather 'hook' buckle belt and woad dyed longsleeve henley, type376. These were done as a special for Burg & Shild in Berlin, logwood dyed. This woad version is a one-off.

6055711132_dd380d6a23_z.jpg

Posted
hmm... not sure... they went to superdenim, and Few&Far, both in the UK. You could contact them and ask. I think F&F might do.

Otherwise, depending on where you are, Nestrobe in Tokyo have just had some in their new delivery.

Just bought one from few and far, thanks for that

Posted

William, the dedication you show your customers is just something special.

You should hang on to it, even as Tender grows. To me that is what makes your brand truely special. Besides the amazing products, of course...

Posted

^^thank you! that's really kind. I'm just delighted people are interested in and buying my products- it's a lovely position to be in. I'll certainly aim to keep on top of things, and I'm lucky to be working with fantastic retailers, which really helps :)

Posted

It's been a little while since I put up any manufacturing photos...

Here's how the little loops for the adjusters on the back of the type 900 jacket (new model- the first production was different) are made. They're sand cast in England from solid brass.

First the mould is set up. A pattern plate is made out of base metal, which looks something like this:

6100781580_4547fdf299_z.jpg (although this plate isn't actually my loops)

A box is half packed with fine black sand, like this:

6100249615_f59b88fe25_z.jpg

and the plate is placed on top:

6100251863_4eb899161d_z.jpg

the top of the box then gets filled with more sand, and pressed down firmly. Now when the plates are separated they can be carefully pulled out, leaving the fine sand with a perfect impression of the pattern plate.

The brass itself all comes from scrap!:

6100800048_978fa759de_z.jpg

6100800696_cb2741383c_z.jpg

(yes that is a brass tap)

which gets melted down over the foundry furnace:

6100256907_b1ce968748_z.jpg

in a crucible:

6100255449_a0c963893c_z.jpg

the brass gets poured by hand into the sand boxes, where it immediately sets in the form of the original pattern plate.

6100258455_fde2703c18_z.jpg

when the sand is broken away you get the rough castings inside, still dirty with sand, like these classic car medals:

6100259841_51e4129546_z.jpg

Posted

bigger things like those medallions^^ come out separately, but smaller pieces, like my loops:

6100276553_fb80fbfc3a_z.jpg

come out on 'trees' which have to be cut off:

6100823478_828dd27730_z.jpg

before the get cleaned up...

first the outside sprue is ground off:

6100824440_13863053cb_z.jpg

6100825296_0fd3ef79f5_z.jpg

then the interior angles are filed down by hand:

6100826942_615fc5cda5_z.jpg

6100280047_e0fa54dd24_z.jpg

after which the loops are roughly polished in a wet drum with marble chips:

6100281533_494e9b1e43_z.jpg

and finally with a finer, dry abrasive grain:

6100828582_ed915e4b4e_z.jpg

and we have lovely english-cast solid brass loops ready to go on to Tender jackets :) :

6100283079_6c20baf2bd_z.jpg

Posted

and here's the type900 hand dyed logwood jacket with natural black shetland wool removable liner that these loops go onto:

6100427923_54fb96d621_z.jpg

6100430615_33a37bbedf_z.jpg

^^there's the loops (four of them) fastening the selvage side straps on the back view. Fit pics to come, if people would like

Posted

the weather's miserable out, which reminds me that I haven't put up any photos of the type990 long lined coat. So out into the drizzle with a mirror....

6119629365_09d5318d0a_z.jpg

6119630689_df1f53b756_z.jpg

type 990 is a longer version of the 900 jacket. It has two outer chest pockets, and the back is darted all the way down to the waist. It's cut from 'flowerpot' dyed artist's canvas, as the trews, and is fully lined down the sleeves, in the pockets, and to the waist in Shetland natural black wool. The lining finishes at the waist with a line of raw cotton herringbone tape. This comes from a 19th Century riding coat pattern. You'd have a wool lining (traditionally Tattersall check) to the waist to keep you warm, but the skirts of the garment would be unlined (or later lined with waterproof polyester) to avoid soaking up horse's sweat while in the saddle.....

I only made 9 of these, which are at Supra-Quintessence (Brussels), Okiya (Antwerp), Few & Far (London), Loftman (Kyoto), and Brown & Seedling (Chiba)

worn here with type 132 woad dyed jeans (sized up one), type 350 logwood dyed T, black 'hook' buckle belt, and Ducker's chukkas with Cat's Paws.

detail photos of the coat to come in a bit

Posted

Just added to my Tender collection.

It's not denim related so hope it's OK to mention here :-)

I ordered one of the remaining satchels, and it arrived today.

Really fantastic piece. Amazing variety of colour and surface on the leather.

Posted

^^thanks for putting these up! I don't yet have a good scan of that F&E page, my copy's on the way. That was really fun for me though (kind of a personal ambition ;) ). I'll put up some pictures of the woggles as soon as they become available at hickorees.

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...