Jump to content
fre-co

White's Horse Hide/Shell Cordovan group order

Recommended Posts

REVISED mine:

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in brown (1 piece for the midsole, 1 piece as a half sole), cuban heel, one extra heel lift, cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg but NO toe cap) w/50's toe (no reinforcement of any kind), smaller welt and 1 row of welt stitching (if possible), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible).

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, last used on the Inventory oxford (the 110 last?) with no celastic (soft toe), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

11. Onehundy US 9.5 D engineers, blach hh, double midsole leather natural color , Vibram 705 sole. 50's toebox, 9 " high, no lining , silver roller buckles, quabaug heel , cuban heel, Metal Toe plate.

12. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt

Share this post


Link to post
Share on other sites

Did some shopping recently.. gotta drop out.

BrownMetallic;2668430]REVISED mine:

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in brown (1 piece for the midsole, 1 piece as a half sole), cuban heel, one extra heel lift, cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg but NO toe cap) w/50's toe (no reinforcement of any kind), smaller welt and 1 row of welt stitching (if possible), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible).

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, last used on the Inventory oxford (the 110 last?) with no celastic (soft toe), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

11. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt

Share this post


Link to post
Share on other sites
Did some shopping recently.. gotta drop out.

Must drop for now; list revised

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in brown (1 piece for the midsole, 1 piece as a half sole), cuban heel, one extra heel lift, cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg but NO toe cap) w/50's toe (no reinforcement of any kind), smaller welt and 1 row of welt stitching (if possible), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible).

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt

Share this post


Link to post
Share on other sites

Please, always copy the last version of the list.

Also, i did some minor corrections to my boot:

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in brown (1 piece for the midsole, 1 piece as a half sole), cuban heel, one extra heel lift, cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...ean-boots1.jpg but NO toe cap) w/50's toe (no reinforcement of any kind), smaller welt and 1 row of welt stitching (if possible), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible).

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

Share this post


Link to post
Share on other sites

Made some changes

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a half sole), cuban heel, one extra heel lift, cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg but NO toe cap) w/50's toe (no reinforcement of any kind), shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching (if possible), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible).

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

Share this post


Link to post
Share on other sites
Is it too late to jump in on this buy?

I think you have until the last week in April, so come on in.

Share this post


Link to post
Share on other sites

Sweet! I'm in.

Size 9.5D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement of any kind), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

Share this post


Link to post
Share on other sites

updated the list with mine request.

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a half sole), cuban heel, one extra heel lift, cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...ean-boots1.jpg but NO toe cap) w/50's toe (no reinforcement of any kind), shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching (if possible), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible).

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://vibergboot.files.wordpress.co...ean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement of any kind), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

Share this post


Link to post
Share on other sites

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, brass roller buckles, built on the chukka last (as seen here http://vibergboot.files.wordpress.com/2011/01/chukkacalf.jpg ) w/50's soft toe (no reinforcement of any kind), shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching (as little space as possible between welt and the leather), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible), cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://vibergboot.files.wordpress.co...ean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement of any kind), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

Share this post


Link to post
Share on other sites

Sorry, after reading the whole thread again I made a change to my order.

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, brass roller buckles, built on the chukka last (as seen here http://vibergboot.files.wordpress.com/2011/01/chukkacalf.jpg ) w/50's soft toe (no reinforcement of any kind), shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching (as little space as possible between welt and the leather), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible), cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, nailed down construction, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement), Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

Share this post


Link to post
Share on other sites

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, brass roller buckles, built on the 2030 last (as seen here http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg but with NO cap toe ) w/50's soft toe (no reinforcement of any kind), shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching (as little space as possible between welt and the leather), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible), cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, nailed down construction, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://vibergboot.files.wordpress.co...ean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement), Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo

Share this post


Link to post
Share on other sites

Another quick update.

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, brass roller buckles, built on the 2030 last (as seen here http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg but with NO cap toe ) w/50's soft toe (no reinforcement of any kind), shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching (as little space as possible between welt and the leather), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible), cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, nailed down construction, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), 1 row of welt stitching, cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://vibergboot.files.wordpress.co...ean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement), Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

Share this post


Link to post
Share on other sites

fixed links.

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, brass roller buckles, built on the 2030 last (as seen here http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg but with NO cap toe ) w/50's soft toe (no reinforcement of any kind), shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching (as little space as possible between welt and the leather), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible), cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, nailed down construction, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), 1 row of welt stitching, cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (2030. as seen here: http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement), Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

Share this post


Link to post
Share on other sites

some changes for my order.

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe with single celastic, capped toe, black horsehide,single midsole leather natural color, standard heel, a close trim or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, brass roller buckles, built on the 2030 last (as seen here http://vibergboot.files.wordpress.co...ean-boots1.jpg but with NO cap toe ) w/50's soft toe (no reinforcement of any kind), shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching (as little space as possible between welt and the leather), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible), cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, nailed down construction, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), 1 row of welt stitching, cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (2030. as seen here: http://vibergboot.files.wordpress.co...ean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement), Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

Share this post


Link to post
Share on other sites

is there any time left to join this by any chance?

Share this post


Link to post
Share on other sites

yes there is brett hasnt replied on my order yet

Share this post


Link to post
Share on other sites

hmm, its ok, i probably wont be able to get the funds together in time. Thanks anyway ed, those are going to be some beautiful boots when they arrive

Share this post


Link to post
Share on other sites

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, no toe reinforcement, brass roller buckles, Cats Paw heels, Cuban heel, one extra heel lift, regular double stitch welt with white stitching, nailed down construction, perforated heel counter and upper vamp, brown stitching on uppers, cut top

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe with single celastic, capped toe, black horsehide,single midsole leather natural color, standard heel, a close trim or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, brass roller buckles, built on the 2030 last (as seen here http://vibergboot.files.wordpress.co...ean-boots1.jpg but with NO cap toe ) w/50's soft toe (no reinforcement of any kind), shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching (as little space as possible between welt and the leather), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible), cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, nailed down construction, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), 1 row of welt stitching, cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (2030. as seen here: http://vibergboot.files.wordpress.co...ean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement), Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

Share this post


Link to post
Share on other sites

minor change again.

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, no toe reinforcement, brass roller buckles, Cats Paw heels, Cuban heel, one extra heel lift, regular double stitch welt with white stitching, nailed down construction, perforated heel counter and upper vamp, brown stitching on uppers, cut top

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe with single celastic, brogue capped toe, black horsehide,single midsole leather natural color, standard heel, a close trim or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, brass roller buckles, built on the 2030 last (as seen here http://vibergboot.files.wordpress.co...ean-boots1.jpg but with NO cap toe ) w/50's soft toe (no reinforcement of any kind), shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching (as little space as possible between welt and the leather), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible), cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, nailed down construction, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), 1 row of welt stitching, cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (2030. as seen here: http://vibergboot.files.wordpress.co...ean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement), Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

Share this post


Link to post
Share on other sites

Made some changes. When is this actually going through Ed?

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, no toe reinforcement, brass roller buckles, Cats Paw heels, Cuban heel, one extra heel lift, regular double stitch welt with white stitching, nailed down construction, perforated heel counter and upper vamp, brown stitching on uppers, cut top

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe with single celastic, brogue capped toe, black horsehide,single midsole leather natural color, standard heel, a close trim or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black japanese horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, cat's paw heel, solid brass roller buckles, built on the 2030 last (as seen here http://vibergboot.files.wordpress.com/2010/08/newlast1.jpg but with NO cap toe ) w/50's soft toe (no reinforcement of any kind), perforated vamp and counter edges (seen here: http://vibergboot.files.wordpress.com/2010/06/newwestern.jpg) shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching, no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, nailed down construction, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), 1 row of welt stitching, cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (2030. as seen here: http://vibergboot.files.wordpress.co...ean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement), Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

Share this post


Link to post
Share on other sites

Hey id love to join this if i can pay with pay pal and if they cost less then 600

Also how do i size, im a 10.5d in redwing GTs, would i be a 10.5E

(not sure how to format order)

a.khan12390

10.5 E service boots 310 last, black HH, nailed down construction, upturned toe, brogue toe cap, all eyelets, cuban heel, single leather midsole, natural edges, cats heel and half sole, brown (and black) laces if possible

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

this shoe with cats paw. thanks, please tell me if i need to correct this

Share this post


Link to post
Share on other sites

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, no toe reinforcement, brass roller buckles, Cats Paw heels, Cuban heel, one extra heel lift, regular double stitch welt with white stitching, nailed down construction, perforated heel counter and upper vamp, brown stitching on uppers, cut top

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe with single celastic, brogue capped toe, black horsehide,single midsole leather natural color, standard heel, a close trim or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black japanese horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, cat's paw heel, solid brass roller buckles, built on the 2030 last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but with NO cap toe ) w/50's soft toe (no reinforcement of any kind), perforated vamp and counter edges (seen here: http://vibergboot.files.wordpress.co...newwestern.jpg) shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching, no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, nailed down construction, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), 1 row of welt stitching, cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (2030. as seen here: http://vibergboot.files.wordpress.co...ean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement), Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

12. a.khan12390

10.5 E service boots 310 last, black HH, nailed down construction, upturned toe, brogue toe cap, all eyelets, cuban heel, single leather midsole, natural edges, cats heel and half sole, brown (and black) laces if possible

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

this shoe with cats paw. thanks, please tell me if i need to correct this

Share this post


Link to post
Share on other sites

can anyone help me size, im a 10.5 d redwings and a 10d wolverine. I was also wondering if its possible to get dual welt stitching?

Share this post


Link to post
Share on other sites
I went with my Red Wing GT/Alden Barrie last size although I'd love to hear how other people are sizing.

I'm sizing the same as on my other Vibergs. For a little help to others, I take the same size in Viberg as I do in Wesco, White's, the Thorogood x Epaulet collab (685 boot), and Clark's DB. This is also the same as my Converse All-Star sizing.

Share this post


Link to post
Share on other sites

Hmm ok, so im a clark US 11, but they are a little big in the length (but perfect in the width) so im going with a 10.5E

Share this post


Link to post
Share on other sites

Small edit, srry to shit this trade up

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

3. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, no toe reinforcement, brass roller buckles, Cats Paw heels, Cuban heel, one extra heel lift, regular double stitch welt with white stitching, nailed down construction, perforated heel counter and upper vamp, brown stitching on uppers, cut top

4. BrownMetallic: 8.5E :: 5" [Cut Top] SERVICE boot :: x NAILED DOWN + Close Trim [natural edges] :: Capped BROGUE x WORK Toe x Celastic:: BLACK Jap HH x BLACK [OR GREY] Chromexcel Bullhide Heel Counter :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: ALL Nickel eyelets__ will attach illustration when finalized.

5. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

6. akiyama71--- size 8.5D 7 inch service boots with worker toe with single celastic, brogue capped toe, black horsehide,single midsole leather natural color, standard heel, a close trim or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

7. rayw44 --- Size US 8.5D 9" Engineer boot, black japanese horsehide, nailed down construction, leather sole in brown (1 piece for the midsole, 1 piece as a HALF sole), cuban heel, one extra heel lift, cat's paw heel, solid brass roller buckles, built on the 2030 last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but with NO cap toe ) w/50's soft toe (no reinforcement of any kind), perforated vamp and counter edges (seen here: http://vibergboot.files.wordpress.co...newwestern.jpg) shaft 1" smaller in diameter, smaller welt and 1 row of welt stitching, no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, cut top.

8. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

9. mctaran -- Service boot, black japanesse hh, nailed down construction, upturned toe, brogue toe cap, all eyelets (color as on picture below), standart heel, single leather midsole, natural edges, vibram 269 sole, cat's paw heel, black leather laces (x2 if possible).

Exactly this boot, but with 269 vibram sole and single leather midsole:

vibergboot.files.wordpress.com/2011/03/horseleather.jpg

My size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

10. Snake US 9D Service boots, black hh, work toes with Celastic, single midsole natural leather, Vibram 430 mini lugs sole, quabaug heel, all antique eyelets, black leather laces, regular double stitch down welt.

11.SingleOrigin Size US 9.5D Engineer Boots, 10", Black Horsehide, nailed down construction, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), 1 row of welt stitching, cuban heel, One (1) extra heel lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (2030. as seen here: http://vibergboot.files.wordpress.co...ean-boots1.jpg) , but with NO toe cap, and w/50's soft toe (no celastic or toe reinforcement), Instep Straps and upper straps two inches longer. Cut top (not rolled), No Lining. No logo.

12. a.khan12390

10.5 E service boots 310 last(the new slim one), black HH japanese, dual welt stitching(white stitch), upturned toe, brogue toe cap, all eyelets (antique), cuban heel, single leather midsole, natural edges, cats paw heel and half sole(if no cats paw half sole, vibram #705 half sole), brown laces (extra pair if possible), cut top, no leather lining

http://vibergboot.files.wordpress.com/2011/04/dsc04603.jpg

the boots in the middle with a cats paw

Share this post


Link to post
Share on other sites

so how much will a pair of engineer boots in black hh or service boots in brown mocha chromexcel cost? just received the boots bible free and easy issue and the vibergs in there looked really great; especially the 40's service boot looked amazing

Share this post


Link to post
Share on other sites
so how much will a pair of engineer boots in black hh or service boots in brown mocha chromexcel cost? just received the boots bible free and easy issue and the vibergs in there looked really great; especially the 40's service boot looked amazing

I believe it is $570 for the service boot and $612 for the engineers, minus 10% for the group savings. Then the horsehide adds an additional 25-30 on top. So the engineers would be right around $580 or so in horsehide, and the service boot would be around $513.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now