Leaderboard

Bought the super smooth fullcount wide jeans. On sale too. first time wearing them, I like them papa nui, RMC, fullcount, vans

Freewheelers Ironalls / Butcher Products / Belafonte / Buckweat

Colimbo Full Count 0105 TwoMonkeys The Colimbo House of Richeld sweat shirt has a boxy and relatively short vintage fit. The sleeves crease nicely and it has the Spalding like cuffs (not sure, what the term for that is).

Dry Bones Bandana ,LVC 506xx , Samurai, oak street boots

I got so much satisfaction out of making that last pair of jeans that I told my brother I wanted to make a pair for him for his birthday. Been drafting the pattern the last couple weeks and finally got it where he wanted it. He's got a little bit more weight in his gut and thighs than I do so it was a good exercise in modifying patterns. Also bought this 1960s New Home (Janome) 532 zig zag machine off Marketplace for $50. It could hardly turn when I got it, so over a few days I doused it in kerosene a few times a day to de-gunk it. That did the trick so I oiled it up, put belt on it, and now I can do bartacks. It doesn't love going through belt loops but if you floor it it will get enough momentum to power through. Also some (admittedly poor) pictures of the denim my brother selected. He wanted a crosshatch slub so I found this stuff on Big Z. More updates to follow!

Denime/Brooks Brothers/TCB/Alden

I've been playing around with my macro lens to shoot close-ups of my son, so I thought that it would be fun to take some macro shots of my DD-1001xx 1947 out of the wash. I got these minimally worn secondhand last September. The color is really beautiful in the sunlight, although the crotch has seen better days after a couple quick repairs. Originally, I was a bit lukewarm on the pre-distressed leather patch and buttons, but they look pretty nice and fit in much better now with significant wear. Back pocket, front pocket, and belt loop shots feel closest to color in true life. \

Probably ordered them during the war and they’ve just arrived

Walpier Buttero, Cobra, Turquoise and brass hardware

my Denime 220A involved to IIY4 - 4 months

1933 / 37 set up Jacket hanging around in Malham after a walk Jeans getting some fresh air after a day on my legs - I'm holding on hopefully until mid-summer before they get a wash, see what happens

No denim today. But these cargo pants are made by Yamane. Obviously, the prototype was the flight equipment suit of the OG-107 era.

Thought l'd share - pinched it from Matt @Rivethead. S501XX probably.

One for @Geeman Abbey England brass buckle - last foundry doing this in the UK now I think - and Walpier Buttero Rocky

Another update, sorry for double posting today. Got the fly pieces attached, did the crotch seam, and did the first pass on the inseam. I have to wait to serge and topstitch the inseam because I want to baste the outseam and have him try them on first. That way I can let out some seam allowance if I need to before actually finishing the inseam. This denim is really trying the limits of my 201-2. I had some troublesome spots on the last pair but nothing as difficult as some of these seams have been. Maybe this is a sign to start shopping for an industrial machine lol. I'm happy with how quick these have come along. It's cool to know that barring fit checks I can definitely knock a pair out in a weekend. If it weren't for other plans and wanting to triple check the fit of these thighs then I'd be wrapping up tonight instead of leaving it where its at right now.

I also found this killer MP era bluebell repro.

Progress from the last couple days. Yokes are attached, backs are sewn, and rear pockets are attached. Front pockets are done too. I've had this gingham canvas for ages and I'm glad it's getting put to use now. My brother's name is Evan, so he wanted a lowercase e on the back pockets. He also wanted a purple tab (and purple serging and inseam topstitching to match later). Added a closeup of the bartacks which came out better than I expected.

Stealth mode Wickett & Craig Harness, iguana, black and antique nickel hardware, vintage jewels and antique Japanese coin

tee shirt OOE Saddle Pants Nicks boots

More Larkin Poe-esque stuff J&FJ Baker oak bark, silver plate buckle and antique nickel studs

My Denime 232 Type II arrived from Celluloid today. Here are the pre-wash measurements: Size: 42 Pit-to-pit: 23" Shoulder: 21.5" Sleeve (shoulder seam to cuff): 27" Body Length: 26.25" Some quick photos in the pre-wash state, including fit are below. I will update with post-wash measurements and more detail shots when I get a chance (along with some macro shots of my other jeans hopefully). Same thing happened to mine after a machine wash and dry - very warped and jerkied (actually not quite as bad as it looked at first glance)..

Got these OOE Saddle pants from @scooby! @julian-wolf these are the jeans I grabbed. Damn near perfect fit. Very cool texture and color to the denim

Here is the 232 post wash and dry. Fabric is still very stiff and relatively smooth with a small amount of coarseness by hand. Color has a grey cast. Size is 42. Pit-to-pit: 21.8" (5% shrinkage) Shoulders: 19" (12% shrinkage) Sleeve (shoulder seam to cuff): 25.25" (7% shrinkage) Length (back collar to hem): 24.2" (8% shrinkage) Sleeve length here makes me question whether I could make the TCB No.2 jacket work with 1.5-2" shorter half shoulder + sleeve length

Here are some close-ups of my TCB 50's that I've worn since last August in rotation with my WH 1001xx. They are relatively slow fading, but some electric blue highlights are showing through in the slubbier and higher wear areas especially in the sunlight. Like the WH pair, the color of these is beautiful in natural light. The color of the front pocket stitching and back pocket corner feel truest to real life - my son was starting to fuss during these so I had to compromise on finding proper exposure and white balance on a few.

These also became a nearly everyday companion this winter and will likely be something I wear into the warmer months as they are so lightweight. Again the fade is so hard to capture. Unlike anything.

Another version of my most common uniform Companion / OA / Birks

I made a detailed review of the 3A-1-CR. I've wanted a 3A-1 for about a decade and since I own three interops jackets I knew I'd have to face that insane price point at some point in my life, so here I am!

It’s a secret 🤫 … but any interest in this beauty? …. noooo not the model, the snappily named cardigan thing

More vintage Justin boots. These are a narrow build but not too snug. Love the heel height. Pretty fresh Vibram soles too.

An end-of-the-winter wear updates on this one. It has become my favorite jacket yet. Perfect fit and the denim is lightweight so I can layer for mild weather. I ended up wearing this jacket daily. The color and texture is so hard to capture on this denim. Looks almost unbleached with a warm but gray tone.

Now that the sun has finally started to break through the perma-cloud cover over London, I thought I'd throw away my old, worn-out green/orange Delphins and replace them with this orange/aqua pair. Hopefully they’ll put a spring in my step for Spring!

SD-101 for my first pair of SDA jeans. I've always loved the brand and love my shirts/tees/sweatshirts, but never had any of their denim. I love the way these fit and the denim is really nice.

Wide, old and comfy Old milk records hat (sadly they are not in business anymor) Stussy x lvc, old shirt, buzz chinos, weird yuketens

I personally ask Hoosier to sharpen them for me. I like to have them draw blood for a while. Hahaha

^ sized down for that famous Sufu fit!

@Broark They just had maybe 10 pairs of jeans for sale leftover from Inspiration; most sold in the first few minutes I guess. There were also a couple of the canvas hunting vests on display (not for sale), and one in a lightweight denim that they said they were gonna be starting production on soon (!). Incidentally, Ryo was wearing his 507XX and I asked if they were planning on making more at some point; he said hopefully yeah

I think it’s one of the best denims out there, very smooth and built to last, it would be great for a competition. I really enjoyed my pair although I wish the SD-101s had a slightly higher rise (back and front).

I heard Freewheelers are thinking of doing a line in incontinent trousers for the ageing population... calling them underalls, like overalls only different

I blame my dislectic, they both have Lee in their name. And I’m sure @lee porter would have been a good model too.

Update on some 51s I’ve had for awhile and a fresh pair of 51s I picked up not that long ago a size down. Particularly enjoying the fades on the button fly. Almost have a back pocket rivet poking through. A few more spills skateboarding and I should be able to send out some sparks!

First wash after roughly 2 months. I admit I have neglected them after getting the Denime 101

Located in NYC. Interested in trade for J68-PL RAF L J46U-WS L 9.5/10 $900 no bag/spec J46-S XL Black 9/10 $1000 no bag/spec J1A-GTPL Navy 9/10 $950 P24A-E Black M 9.5/10 $1150 P41-DS Black M 9/10 $600 P46-DS Black S 9/10 $800 LA10-M M Black $900 9.5/10 LA10-DS M Black $1050 9/10 LA10-DS M Alpha $1050 9/10 LA8-DS M $1000 8.5/10 J72-DS M RAF $1200 9.5/10 S26-PR Black L 7/10 $150

If I'm not mistaken, Jerry Garcia preferred the Wrangler?

Manopause

^ Wasn’t that @Jared_Lee in the photo shoot rather than @lee porter?

The vests were nice, both the duck and the denim. 10 pockets, if I recall. Enough to completely lose track of where something is 😉

Union Special / Bubo / Vanishing West / Russell Really not used to wearing jeans this slim, these days

Stan Ray wool mix shirt Warehouse T Warehouse 1000XX DSB Kamakura socks

understanding very much discussions above; good luck with the socialisation; takes a village to raise the child... (or via Lev Vgotsky; it is through others we becomes ourselves...) 1960s finnish army surplus (m62) / lvc 1870s / pecos

Hope you all aren't sick of me yet lol. Stayed up past my bedtime last night finishing up all the sewing (other than the patch, waiting on that material to ship from an etsy seller). Tried doing rivets and buttons on the practice pair but was having trouble with those. Not gonna put any of those parts on this pair till I know I can do it cleanly. The waistband was the trickiest part. Was advised not to put interfacing inside so that it can stay pliable, but that made it harder to keep everything straight. After a couple unsuccessful attempts where the needle failed to catch the inside seam I ended up sewing down the inside seam allowance to the inside of the jeans and then pinned along the length of the waistband down the middle to keep the needle from missing the inside seam. Worked alright once I decided to just use the handwheel all the way around. Not ideal but it looks way cleaner than any attempt I made with the foot pedal. This was the only time I really got frustrated during the process, so not so bad in the grand scheme. Decided to do tucked belt loops because I love that detail on my Left Field pairs. Gives me something to put my keys on that won't pull the top of the waistband down. Next time I make a pair I will get a zigzag machine so I can do bartacks. Thought about hacking em with the buttonholer, but decided not to since the buttonholer foot wouldn't hold much fabric on the belt loops, so slippage might have occurred.