White's Horse Hide/Shell Cordovan group order

marineabilly · February 11, 2011

Hmmm, not sure if the width difference between D and E is negligible.

I read some pages back that Ed wants to limit "group buy" contact with Bret.

Ed, perhaps you can send him this RFI (request for information) since there are a lot of D's and E's being ordered.

ADH92, I just built of Ray's design. The perforated edges will give any Engineer Boot collection a nice little added variety.

Cheers!

pepper davies · February 11, 2011

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer, horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, brass roller buckles, brown stitching on uppers, logo on front, pull strap

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,double midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 9", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lifts, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca/officialgallery/wp-content/uploads/2010/09/service-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqFg/TE-ZUitUN0I/AAAAAAAAC8M/oDVYZ5-0YAw/s1600/VB.jpg, No Lining.

14. bove 9.5 D? Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca/officialgallery/wp-content/uploads/2010/09/service-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqFg/TE-ZUitUN0I/AAAAAAAAC8M/oDVYZ5-0YAw/s1600/VB.jpg, No Lining

Alright. Finished up mine. Thanks for the inspiration Marineabilly.

Just a note guys, when copying the list to make edits please click "reply with quote" and then delete the quote tags. Otherwise, all of the links will get broken. I think I fixed all of them, but it'll keep happening if you don't hit "reply with quote". Thanks!

halberdklown · February 11, 2011

i wont let this go past 6 and a half bills without shipping buddy dont worry

damn, if this is true I'll be jumping on a pair of HH engineers as well! shout outs to marineabilly for the idea on what should be a great looking pair of engineers!

akiyama71 · February 12, 2011

making a change to my boots.

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer, horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, brass roller buckles, brown stitching on uppers, logo on front, pull strap

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 9", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Catâ€™s Paw heels, One (1) extra heel lifts, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca/officialgallery/wp-content/uploads/2010/09/service-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqFg/TE-ZUitUN0I/AAAAAAAAC8M/oDVYZ5-0YAw/s1600/VB.jpg, No Lining.

14. bove 9.5 D? Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Catâ€™s Paw heels, One (1) extra heel lift, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca/officialgallery/wp-content/uploads/2010/09/service-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqFg/TE-ZUitUN0I/AAAAAAAAC8M/oDVYZ5-0YAw/s1600/VB.jpg, No Lining

marineabilly · February 13, 2011

Made an update to my boots

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer, horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, brass roller buckles, brown stitching on uppers, logo on front, pull strap

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Stacked Cuban heels with one (1) extra lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course, and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, Cut top (not rolled) like this (bottom right photo) http://image.rakuten.co.jp/cott-o/cabinet/10_04_17/vai_eb01_43.jpg, No Lining.

14. bove 9.5 D? Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

bove · February 13, 2011

Adding info I forgot to put in first time:

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer, horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, brass roller buckles, brown stitching on uppers, logo on front, pull strap

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Stacked Cuban heels with one (1) extra lift, Catâ€™s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course, and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, Cut top (not rolled) like this (bottom right photo) http://image.rakuten.co.jp/cott-o/cabinet/10_04_17/vai_eb01_43.jpg, No Lining.

14. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Catâ€™s Paw heels, One (1) extra heel lift, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

BrownMetallic · February 13, 2011

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer, horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, brass roller buckles, brown stitching on uppers, logo on front, pull strap

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic: [***granted, no brown or natural HH available] 8.5EE :: 5" SERVICE boot :: WORK toes, Capped [w/ Celastic] :: BROWN Chromexcel uppers X TAUPE Bullhide counter :: SINGLE Midsole, NATURAL trim :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: RED leather lining :: ALL Nickel eyelets

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Stacked Cuban heels with one (1) extra lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course, and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, Cut top (not rolled) like this (bottom right photo) http://image.rakuten.co.jp/cott-o/cabinet/10_04_17/vai_eb01_43.jpg, No Lining.

14. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

headsistails · February 13, 2011

Are we able to choose from all of takashi san's styles?

bove · February 15, 2011

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel
2. headsistails - Size 8.5 E, 9" Engineer, horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, brass roller buckles, brown stitching on uppers, logo on front, pull strap

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic: [***granted, no brown or natural HH available] 8.5EE :: 5" SERVICE boot :: WORK toes, Capped [w/ Celastic] :: BROWN Chromexcel uppers X TAUPE Bullhide counter :: SINGLE Midsole, NATURAL trim :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: RED leather lining :: ALL Nickel eyelets

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Stacked Cuban heels with one (1) extra lift, Catâ€™s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course, and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, Cut top (not rolled) like this (bottom right photo) http://image.rakuten.co.jp/cott-o/cabinet/10_04_17/vai_eb01_43.jpg, No Lining.

14. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Catâ€™s Paw heels, One (1) extra heel lift, Brass Roller Buckles, last used on the Inventory oxford (the 110 last?) with no celastic (soft toe), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

headsistails · February 16, 2011

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer, horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, brass roller buckles, brown welt stitching, logo on front, pull strap, rolled top

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic: [***granted, no brown or natural HH available] 8.5EE :: 5" SERVICE boot :: WORK toes, Capped [w/ Celastic] :: BROWN Chromexcel uppers X TAUPE Bullhide counter :: SINGLE Midsole, NATURAL trim :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: RED leather lining :: ALL Nickel eyelets

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Stacked Cuban heels with one (1) extra lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course, and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, Cut top (not rolled) like this (bottom right photo) http://image.rakuten.co.jp/cott-o/cabinet/10_04_17/vai_eb01_43.jpg, No Lining.

14. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, last used on the Inventory oxford (the 110 last?) with no celastic (soft toe), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining[

Colin.Cosmo · February 16, 2011

This is looking awful tempting at this point. Im wondering if someone can clarify the lasts for the service boot. ive read the thread and the blog but still not sure if the black cordovan "sample" service boot is the same last and toe as the flat toe shape used for the four horsemen boot.

The cordovan "sample" boot last is definitely the one I like but not sure what it's called. New last?

Also, is brown calf available?

Thanks.

halberdklown · February 16, 2011

^ yes " new last" seems to be what they are calling it, and the cordovan and four horsemen boot are on the same one

Colin.Cosmo · February 16, 2011

Many thanks!

headsistails · February 19, 2011

Soo Ed, any update on this? I hate to be annoying but....

Mich · February 21, 2011

Decided to step up my engineer game and join in.

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer, horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, brass roller buckles, brown welt stitching, logo on front, pull strap, rolled top

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic: [***granted, no brown or natural HH available] 8.5EE :: 5" SERVICE boot :: WORK toes, Capped [w/ Celastic] :: BROWN Chromexcel uppers X TAUPE Bullhide counter :: SINGLE Midsole, NATURAL trim :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: RED leather lining :: ALL Nickel eyelets

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Stacked Cuban heels with one (1) extra lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course, and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, Cut top (not rolled) like this (bottom right photo) http://image.rakuten.co.jp/cott-o/ca...ai_eb01_43.jpg, No Lining.

14. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, last used on the Inventory oxford (the 110 last?) with no celastic (soft toe), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

15. Mich US9.5 E, Engineer, 9" Black Horsehide with undyed edges and Brown Stitching throughout, No Lining, Rolled Top in different leather: Icy Mocha Chromexcel (just the roll), No Pull Strap, Double Leather Soles with natural edges and Cat’s Paws half sole (if the Cat’s Paws half sole is not possible just Double Leather Soles), Cuban heels with Cat’s Paw heels, Brass roller buckles, No Celastic (soft toe with low profile), The Last (and Heel) the same as on this boot http://vibergboot.files.wordpress.com/2010/10/engineer11.jpg ,Regular Double Stitch Welt with White Stitching.

marineabilly · February 22, 2011

I'm looking to make a bunch of changes - is the ball still rollin' on this buy?

rayw44 · February 23, 2011

Seconded, when are we going to actually be able to place our orders? Any new updates?

edmond · February 23, 2011

rollin high im just too picky ont he hide hod on while brett awaits some more sample hh

rayw44 · February 24, 2011

rollin high im just too picky ont he hide hod on while brett awaits some more sample hh

Awesome! Thanks for letting us know.

rkusmant · February 24, 2011

Is there any option for chromexcel leather for engineer boots? I'm really sold with this http://vibergboot.wordpress.com/2010/08/30/engineer-merlot-horween-chromexcel/

mctaran · February 24, 2011

Also a question: Japanesse HH will be only black? will sell my soul for brown color

rayw44 · February 25, 2011

Needed to make some changes after I got my Wescos.

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer, horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, brass roller buckles, brown welt stitching, logo on front, pull strap, rolled top

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic: [***granted, no brown or natural HH available] 8.5EE :: 5" SERVICE boot :: WORK toes, Capped [w/ Celastic] :: BROWN Chromexcel uppers X TAUPE Bullhide counter :: SINGLE Midsole, NATURAL trim :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: RED leather lining :: ALL Nickel eyelets

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cuban heel, cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg but NO toe cap) w/50's toe (no reinforcement of any kind), smaller welt and 1 row of welt stitching (if possible), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Stacked Cuban heels with one (1) extra lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course, and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, Cut top (not rolled) like this (bottom right photo) http://image.rakuten.co.jp/cott-o/ca...ai_eb01_43.jpg, No Lining.

14. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, last used on the Inventory oxford (the 110 last?) with no celastic (soft toe), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

15. Mich US9.5 E, Engineer, 9" Black Horsehide with undyed edges and Brown Stitching throughout, No Lining, Rolled Top in different leather: Icy Mocha Chromexcel (just the roll), No Pull Strap, Double Leather Soles with natural edges and Cat’s Paws half sole (if the Cat’s Paws half sole is not possible just Double Leather Soles), Cuban heels with Cat’s Paw heels, Brass roller buckles, No Celastic (soft toe with low profile), The Last (and Heel) the same as on this boot http://vibergboot.files.wordpress.co...engineer11.jpg ,Regular Double Stitch Welt with White Stitching.

headsistails · February 27, 2011

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 10" Engineer, black horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, silver roller buckles, brown or black welt stitching, instep and top straps 1" longer w/ pointed ends, logo on front, pull strap, rolled top

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic: [***granted, no brown or natural HH available] 8.5EE :: 5" SERVICE boot :: WORK toes, Capped [w/ Celastic] :: BROWN Chromexcel uppers X TAUPE Bullhide counter :: SINGLE Midsole, NATURAL trim :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: RED leather lining :: ALL Nickel eyelets

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cuban heel, cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg but NO toe cap) w/50's toe (no reinforcement of any kind), smaller welt and 1 row of welt stitching (if possible), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Stacked Cuban heels with one (1) extra lift, Cat’s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course, and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, Cut top (not rolled) like this (bottom right photo) http://image.rakuten.co.jp/cott-o/ca...ai_eb01_43.jpg, No Lining.

14. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, last used on the Inventory oxford (the 110 last?) with no celastic (soft toe), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

15. Mich US9.5 E, Engineer, 9" Black Horsehide with undyed edges and Brown Stitching throughout, No Lining, Rolled Top in different leather: Icy Mocha Chromexcel (just the roll), No Pull Strap, Double Leather Soles with natural edges and Cat’s Paws half sole (if the Cat’s Paws half sole is not possible just Double Leather Soles), Cuban heels with Cat’s Paw heels, Brass roller buckles, No Celastic (soft toe with low profile), The Last (and Heel) the same as on this boot http://vibergboot.files.wordpress.co...engineer11.jpg ,Regular Double Stitch Welt with White Stitching.

headsistails · March 2, 2011

Sorry guys....I'm out.

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

3. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

4. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

5. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

6. BrownMetallic: [***granted, no brown or natural HH available] 8.5EE :: 5" SERVICE boot :: WORK toes, Capped [w/ Celastic] :: BROWN Chromexcel uppers X TAUPE Bullhide counter :: SINGLE Midsole, NATURAL trim :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: RED leather lining :: ALL Nickel eyelets

7. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

8. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

9. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cuban heel, cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/clean-boots1.jpg but NO toe cap) w/50's toe (no reinforcement of any kind), smaller welt and 1 row of welt stitching (if possible), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible).

10. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

11. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

12. Marineabilly --- Size 8D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Stacked Cuban heels with one (1) extra lift, Catâ€™s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course, and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, Cut top (not rolled) like this (bottom right photo) http://image.rakuten.co.jp/cott-o/ca...ai_eb01_43.jpg, No Lining.

13. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Catâ€™s Paw heels, One (1) extra heel lift, Brass Roller Buckles, last used on the Inventory oxford (the 110 last?) with no celastic (soft toe), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

14. Mich US9.5 E, Engineer, 9" Black Horsehide with undyed edges and Brown Stitching throughout, No Lining, Rolled Top in different leather: Icy Mocha Chromexcel (just the roll), No Pull Strap, Double Leather Soles with natural edges and Catâ€™s Paws half sole (if the Catâ€™s Paws half sole is not possible just Double Leather Soles), Cuban heels with Catâ€™s Paw heels, Brass roller buckles, No Celastic (soft toe with low profile), The Last (and Heel) the same as on this boot http://vibergboot.files.wordpress.co...engineer11.jpg ,Regular Double Stitch Welt with White Stitching.

edmond · March 2, 2011

brett is sending me a swatch again in th next few days finger crossed hope this is it

marineabilly · March 3, 2011

I'm out...Pickin' up the MF RC's.

aso2004 · March 12, 2011

I am out .

Taking me too long and I will see what I can find or get made in my trips I am making over the next two months...

So here is the new list...

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

3. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

4. ADH92 - Size 11.5D - Engineers, Black horsehide, double leather soles with natural edges (1 piece for the midsole, 1 for the sole), 10" high, no lining, brass roller buckles, Cats Paw heels, Cuban heel, regular double stitch welt with white stitching, perforated heel counter and upper vamp

5. BrownMetallic: [***granted, no brown or natural HH available] 8.5EE :: 5" SERVICE boot :: WORK toes, Capped [w/ Celastic] :: BROWN Chromexcel uppers X TAUPE Bullhide counter :: SINGLE Midsole, NATURAL trim :: VIBRAM 705 half-soles + CAT's PAWs [Cuban heels] :: RED leather lining :: ALL Nickel eyelets

6. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

7. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,single midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

8. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cuban heel, cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...ean-boots1.jpg but NO toe cap) w/50's toe (no reinforcement of any kind), smaller welt and 1 row of welt stitching (if possible), no lining, no pull straps, yes to logo (on the inside if possible), straps on top and bottom 2" longer, brown stitching on uppers (if possible).

9. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

10. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

11. Marineabilly --- Size 8D Engineer Boots, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Stacked Cuban heels with one (1) extra lift, Catâ€™s Paw heels, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course, and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, Cut top (not rolled) like this (bottom right photo) http://image.rakuten.co.jp/cott-o/ca...ai_eb01_43.jpg, No Lining.

12. bove 9.5 D, Engineer, 10", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Catâ€™s Paw heels, One (1) extra heel lift, Brass Roller Buckles, last used on the Inventory oxford (the 110 last?) with no celastic (soft toe), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

13. Mich US9.5 E, Engineer, 9" Black Horsehide with undyed edges and Brown Stitching throughout, No Lining, Rolled Top in different leather: Icy Mocha Chromexcel (just the roll), No Pull Strap, Double Leather Soles with natural edges and Catâ€™s Paws half sole (if the Catâ€™s Paws half sole is not possible just Double Leather Soles), Cuban heels with Catâ€™s Paw heels, Brass roller buckles, No Celastic (soft toe with low profile), The Last (and Heel) the same as on this boot http://vibergboot.files.wordpress.co...engineer11.jpg ,Regular Double Stitch Welt with White Stitching.

Madmax · March 12, 2011

I am also out, taking too long.