All Activity

I’ll try to get one soon. Now that I think of it, since you have a ranch jacket I’d compare the fit to the ranch jacket one size down. Ie my 38 ranch feels pretty similar to the 40 OA, but the OA sleeves are narrower.

WTS J-78 WS - Size M. Some signs of wear on the zippers (paint getting of, I guess not unusual for this age), otherwise flawless condition. Washed regularly and worn most of the times under a hardshell. 1000€ / 1100$ + fees Located in Germany https://imgur.com/a/F0uORIZ

@AlientoyWorkmachine thanks for the intell... and you know this now calls for fit pics if you have any to hand they would be welcomed

Came here to say this same thing!!

I believe this run was in 2017, they made them specifically for commonori products, which is defunct. I got lucky and swapped my 38 for a gently worn 40. It is a shorter body jacket for sure but I love it. Would recommend if the measurements track. It runs a bit small but not as small as their jeans. The chest feels closer to true to size but shoulders, arm opening and body length are all on the small end of expected.

^^ what year are the jackets from? Were they when Ooe went direct? Apologies if it's been said above!

What sunglasses are cutting it gents? I'm more inclined to lower cost with good lens quality but open to all suggestions... thanks

Looks good @Broark and sizing looks good for me but must resist!! Deffo on the shorter size for a 44 @ 58.5cm - can see it won't work for you extra tall folk though Austin

@Broark Thanks for digging around. Yeah, that’s about where I’d landed to. The price doesn’t seem fair compared to what it cost in 2015, but then again it’s probably about what FW would charge if they were to make another run of them now, so…it’s hard to complain. Still might go for it

FYI seems like there’s a restock of non-wash pairs at Hinoya.

Diacock is still loved

Size of the Phigvel pocket

Another type II just popped up, this time in a larger size (44). The body length would never work for me, but I'd love if someone here was able to make it work. https://page.auctions.yahoo.co.jp/jp/auction/k1140652142

@julian-wolf I think the Yahoo listing is just referencing a FW lot number that doesn't exist. The bag looks authentic and in good shape for how old it is, but they're asking for 50% more than the original price (16,000¥). I'd like if they reran the Kingfisher at some point as it would make for a good work bag, but not plans currently.

The rise on SDA jeans does seem a little short compared to most repro brands. I think the 502 may be 50s inspired but isn’t classic 50s. I wore the 101 in a size 32 some years back and if I remember correctly the front rise was about 11” or so, maybe a little more (that’s after much wearing and washing) - another inch and they’d have been perfect. Those 502s seem to have an even lower front rise. interestingly, I also have a raw pair of (out of production) SD-001 in size 31. These are a 14oz LHT pair rather than the 15oz RHT 101s. They have a higher rise, bigger waist and thigh measurements than another raw pair of 101s I also have in size 32, although both are supposed to be based on the same cut. The 001s seem to be a more authentic 50s cut.

SEUVAS MATCHA-DYED CAPSULE COLLECTION Seuvas brings us a new match dyed capsule collection taking their three best selling garments and presenting them in a subtle green by garment dying them in matcha. We also have a new "wing collar" jacket with a nice side tied gusset detail. Seuvas is a brand dedicated to the art of producing canvas of all weights. They own their own canvas looms and factory which produces their canvas exactly to their specifications for the right look and texture. They even cut and sew all the garments in their own workshop in Kurashiki, Japan using vintage sewing machines so that the canvas reacts with just the right amount of puckering at the seams. The only exterior branding on their garments is a single hand-made porcelain button made from clay ore (Amakusa pottery stone) mined in Amakusa City, Kimamoto prefecture, Japan. Amakusa pottery stone is a historic pottery stone that is a raw material which has been used in Japanese pottery since the 17th century. These porcelain buttons are designed by Seuvas and made in the traditional way in Amakusa. Shop Seuvas Online: https://www.selfedge.com/seuvas

Freewheelers x 2 / Mister Freedom / Hollows / Lofgren

Bump $850 cmon get at me

I wouldn't say the handsewn is inherently higher quality. The resulting look is slightly different. I have a pair of Alden shell tassel loafers (from shoe mart factory seconds, with possibly fewer imperfections than my first quality models -- that's a tale for another time), and I like the machine stitch on the apron. It's a bit "neater" and that makes it a bit dressier than the handsewn, which works for what I wear them for. Of course, if you are going for something more casual, then that won't be an issue. I think there is a place for both.

Got some new stuff in Tokyo and since my trip too: koverall jacket and painter pants ivory herringbone work trousers linen/cotton work trousers black sports jacket Java rayon shirt

Long time no log in… I moved from the UK to South Carolina earlier this year, spent 7 weeks in Japan in between and now settling into southern life. here’s a photo dump: Shizuoka - home in Japan to Tokyo, Yokohama, Hiroshima, Okinawa…then to our new home in South Carolina. And a trip to Katz’s deli in NYC

Seems like an extremely low rise for a 50s fit. Or any fit for that matter.

Phigvel made a moccasin

After a long period of deliberation and remeasuring my slimmest pair (a modern day 501 that I still keep as reference and which is slimmer than the Kyotos), I finally scooped these up today. There aren't too many older pairs that pop up in both my waist and inseam (31/33, 31/34) so I figured that this was my chance. Worst case they will fill the 60s repro void in my closet

I know that the big Alden-heads really hate the mechanically sewn models, but I have not seen them in person so my knowledge is all secondhand. They could actually be bad or it could just be frustration at change. I've never really dabbled in Alden loafers because my feet make loafer sizing very difficult and I'm never in a place with an Alden stockist for long enough to get properly sized. It's also relatively hard to find secondhand pairs in long and narrow sizes to take a quick sizing flyer. Alden Model Project compiles all the second hand listings too if you can find a pair in your size. I would not pay much more than $200 - non-shell loafers don't hold the same resale value as their boots. https://aldenmodelproject.com/