thatslapz

FS:

J53TS-GT / Med (first gen) - Good condition, used but minimal signs of wear. $1500 USD net.  Pictures on Grailed https://www.grailed.com/listings/9067194-Acronym-J53TS-GT

J40-S / Med / Black - Patina in high wear areas, light patina overall. No rips/tears/stains.  $700 USD net.  Pictures on Grailed https://www.grailed.com/listings/9039002-Acronym-Acronym-J40-S

P32-DS / Small - Worn twice, selling because I am keeping the stotz version.  $1100 USD net.  I can take pictures but they're basically new.  ON HOLD

WIll trade above for J1A-GT 2.2 Medium as well.  Thanks.

WTB: J1A-GTV Medium

Below items are available for trade but not for sale unless otherwise noted. I can provide pictures to anyone that actually has a J1A-GTV and is interested in trading for any of the below.  Since I am in the camp of people that wear their clothes, most of the below have signs of use.  However, I like to think I value them fairly (i.e. all below retail, some significantly so).  For trades, we will invoice each other the agreed upon value of our items and pay necessary PayPal fees.  DM's asking for outright purchase will be ignored for now.  

J53TS-GT / Med (first gen) - Good condition, used but minimal signs of wear.

J40-S / Med / Black - Patina in high wear areas, light patina overall. No rips/tears/stains.  Also will sell for $750 USD net to me.  Pictures on Grailed listing.

J1B-S / Med / Raf - Light overall patina, more noticeable in high wear areas but no rips/tears/stains.

J56-S / Med / Black - Light fabric patina in high wear areas.  Hood notch had a small tear, which was repaired and patched by bt4d.  Patch is black stotz (different weave).  Again, will value fairly for trade.

P10A-CH / Small / Night - Fabric patina but no rips/tears/stains.

P24A-DS / Small (first gen) - Some light wear in high wear areas, but no exterior rips/tears/stains.  The bottom of one deep pocket was not fully stitched when I received it.  Repaired by b4td.  Additionally, on the interior waistband, the stitching that holds the waist reinforcement to the waist band came undone (its one small stitch at the belt loop).  Repaired and reinforced by local tailor. 

2 hours ago, kriztopher said:

How is the fit of p32 compare to p24a? P24a is listed as straight fit but I still find it a little baggy. 

I find the P32 to feel more like a "trouser" but it is definitely still a wider cut trouser.  It feels slightly wider than the 24 from the knees up, and tapers a little more from the knee down.    P24A is more visibly articulated, but based on initial impressions the P32 seems to have more freedom of movement.  At times, it really doesn't feel like you're wearing pants in the 32.  

On 4/8/2019 at 10:36 AM, thatslapz said:

Drop, $900 shipped in US, $950 international.  Going back at end of week if no takers.  

Final drop.  P32-S Black Small only tried on

$875 shipped in US (saves you $350 off USD retail + customs + shipping), $925 shipped elsewhere.  This is break even with me returning back to Acronym, ($825 net to me).  Payment needs to be received by 10AM PST tomorrow for this price.  

Decided to keep, they're good enough I can live with two pairs.  

On 4/5/2019 at 10:09 AM, thatslapz said:

WTS - P32-S Black Small, brand new, only tried on.  $1100 shipped US, $1150 shipped international.  These were more expensive than the DS for me because of the tax rate (16.6% vs 7.1%).  Below cost regardless.  

Drop, $900 shipped in US, $950 international.  Going back at end of week if no takers.  

On 4/5/2019 at 1:13 PM, JoseRizal said:

You tried it on? Was wondering if you can tell me how the waist fits? Measurement seems big

It feels TTS in the waist for me, DS was a little looser in the same size.  I can take some measurements if you have any specific requests.  

Edit: Measurements added @JoseRizal

As always, give a little leeway on these as Acronym is hard to measure.

Waist: 16.5in

Front Rise: 14in

Rear rise: 13in

Knee at articulation - about 10 inch.  

WTS - P32-S Black Small, brand new, only tried on.  $1100 shipped US, $1150 shipped international.  These were more expensive than the DS for me because of the tax rate (16.6% vs 7.1%).  Below cost regardless.  

WTS: P10TS-DS small.  9/10 condition, full pack.  $1050 shipped in US, PM for international but generally about +$50.  

Pictures added - as you can see the only real wear is very minor pilling on the inside of the main pocket bags.  An actual 9/10, 10 being brand new and flawless.

https://imgur.com/a/wWWaAcY

SOLD

Price drops.

3A-MZ5 / Black XPAC - $275 shipped in US.  Outside US PM for quote.  Used a few times, but once I purchased an MZ4, I rarely use them anymore.  Full kit.      SOLD

3A-MTS6 / Olive - $100 shipped in US.  Outside PM for quote.  Used once.  Full kit.  SOLD.

WTT for/WTB:

3A-WB2 - anybody with one looking to trade for the above gets priority.  

18 minutes ago, RodG said:

Yes and I made sure everyone who looked at the listing knew there was a restock coming (I directly said so in the description). Whoever bought it was (or should have been) very well aware that they could wait and try next month. I also paid the ~$428 import tax on it as I've mentioned, so after fees that's not as large of a mark up as it appears. I'll take the negrep, but I didnt want to spam the topic with an over priced listing (~2.2k was my PayPal fee + shipping break even since I paid ~2,060, that's like 400 more than others could sell for) especially after everyone agreed to wait on wtbs.

Like I said, I don't really care if people sell for profits anymore.  I agree your price wasn't that bad, I just found it a little amusing you were calling someone else out for something similar.  No hard feelings, and thank you for responding like an adult.

WTS.  Can combine and discount shipping for purchases of multiple items.

Racer Pink Presto / US10 / BNIB.  $225 shipped in US.  Will discount $25 for local pick-up (SF) and trades.  SOLD

DS-KA3 / Medium / $300  $275 shipped in US.  Outside US PM for quote.  Good condition.  Exterior has a small patch that is slightly lighter than the rest of the shirt, but I did not notice it until I took pictures and my camera overexposed it.  Minimal signs of wear to the rest of the exterior.  Interior has minor pilling in high wear areas.  Comes with bag, spec sheet, tags, shirt sling, and spare button.  I updated with better quality pictures (images 1-5 in link below), but left the original images for full transparency.  As you can see, the slight discoloration is barely noticeable under normal lighting.  

Photos: https://imgur.com/a/Ku9GKMw   SOLD

DS-LA3 / Medium / $350 shipped in US.  Outside of US PM for quote.  Worn but good condition.  Minor signs of wear on exterior, with most significant being some pilling on the rear bottom.  Interior has some minor pilling as well.  Comes with bag, spec sheet, tags, shirt sling, and spare button.  

Photos: https://imgur.com/a/KrTvsc3  SOLD

3A-MZ5 / Black XPAC - $300 shipped in US.  Outside US PM for quote.  Used a few times, but once I purchased an MZ4, I rarely use them anymore.  Full kit.    

3A-MTS6 / Olive - $110 shipped in US.  Outside PM for quote.  Used once.  Full kit.

WTT for/WTB:

3A-WB2 - anybody with one looking to trade for the above gets priority.  

50 minutes ago, Leviathan_division said:

Bonjour to the community, my first post here! 

I have a question about the legitimacy of a pair of p17. Bought from eBay, these size l pants have a gargantuan 40 inch waist (all size charts online state it’s supposed to be something like 34) and a dodgy looking 3x dry label inside. Would appreciate your help. Pics attached.

Cinch them.  Label looks fine.  See reference for fit:

https://hbx.com/brands/acronym/p17-ds-schoeller-r-dryskin-drawcord-trouser

WTS:

Racer Pink Presto / US10 / BNIB.  Local pick-up (SF) - $200.  Would prefer not to ship, but $225 shipped in US.  Priority to local pick-up and trades.

Dynamic Yellow Presto / US10 / BNIB.  Local pick-up (SF) - $175.  Would prefer not to ship, but $200 shipped in US.  Priority to local pick-up and trades.  SOLD.

DS-KA3 / Medium / $300 shipped in US.  Outside US PM for quote.  Good condition.  Exterior has a small patch that is slightly lighter than the rest of the shirt, but I did not notice it until I took pictures and my camera overexposed it.  Minimal signs of wear to the rest of the exterior.  Interior has minor pilling in high wear areas.  I can shave this off with a depiller upon request.  Comes with bag, spec sheet, tags, shirt sling, and spare button.  Serious inquiries PM me for pictures.  Pictures here: https://imgur.com/a/Ku9GKMw

WTT for/WTB:

3A-WB2 - anybody with one looking to trade for the above gets priority.  

25 minutes ago, RapGameTaylorSwift said:

Has anyone washed any of the jackets with reverse raw edges (like the J66 or J69) yet? Curious if a wash increases the amount of fraying. 

Yes, J69.  And no, not really.  It looked pretty much the same.  

25 minutes ago, piece keeper said:

Errolson's really stepping up his product video reels.  Next one is a full on movie.  Statham in J73-WS + P10A and The Rock in P24A.

 

  Hide contents

 

Now we know where the price hike money is going.

Machine wash, hot water with fabric softener and bleach.  Double rinse.  Tumble dry high.

5 hours ago, lopiteaux said:

This is the exact advice I was after, thank you @thatslapz (and @saskey for driving it out!)

Does the first gen also have a dual zipper so that it can be zipped to the top and then unzipped from the bottom? None of the images that I've found for the first gen show this functionality...

Yeap, mine is dual zip.

23 hours ago, saskey said:

Cheers to all!
I am looking out for a J25-WS. Any thoughts / recommendations regarding the different generations (gen 1.0 in 2012 and gen 1.1 in 2016) and the sizing?
In the pages before I found the same question but no answers. Sorry if I oversaw something.
Thanks in advance to y'all!

The earlier generation is a different Windstopper.  It has a smoother outer face and is a little quieter.  The later generation I think is the same WS used in recent pieces, and is a little louder with a more textured surface.  Can't comment on sizing or anything, but they should be pretty similar.  I've been using my first gen for years with no issues, can't go wrong with either.  

39 minutes ago, Rough Sleeper said:

J47A-WS – same jacket from FW-1516, in cheaper fabric, but priced as much as original one.

J47TS-GT  – same jacket from FW-1516, with tec-sys instead of pocket LOL, priced almost twice as much as original one. 

NG4-PS – is NG3-PS from FW1516

NG9-PS – castrated version of NG3-PS

P23A-DS – P17 with cuffs, sorry, P23 with pockets (I like them though)

P27-DS, P27H-DS – P25's with slightly shorter in leg and drop. WOW!

P24A-S – upgraded version of WS-P3A from FW-0506?

SP28TS-DS – I don't even want to talk about these LMAO.

J69-GT – uglier version of GT-J22 from SS-12?

P22-DS – Lazy version of P17 with ugly cut.

Every single bag is worse than the original x-pac released 10 years ago, not just from design stand point, but functionally. Remove inner padding, remove pockets, logos, triple the price and call it "striped down version" LMAO. As for 3A modulars and prices, I don't even want to talk about them. 

Oh yeah? Name at least one original *hit* he released this fantastic year. 

 

You're right, everything was trash what was I thinking.

3 hours ago, zeusneckone said:

The best way for two MK2s is on the sides.

Also confirming, what @thatslapz said. A MK1 (left) can fit between the buckle straps but a MK3 is a better fit. 

 

Those look familiar , glad you finally got your MK2s man setup looks great.

22 hours ago, eyesolation said:

wait mine didn't come with any patches ... which pocket are they supposed to be in? only had the infinium tag in one of the side pockets ... fml

They were in the chest pockets, probably per Danwise's explanation.  

8 hours ago, paper2k1 said:

WTH, just got my order from the mods drop

i find that one of mp2ts is missing, even though been charged.

by the way, my 1st impression of 3a-wb2

much thinner than I expected and almost looks like women's skinny belts

Hopefully they are quick to resolve this.  Sounds like this happened during the clothing drop for at least a couple people and they got sorted out.

3 minutes ago, Danwise said:

The 3 patches of Infinium are there to stop the zipper heads making an impression/tearing the fabric on the front pockets.

I got the same jacket back, pretty certain it was cleaned too (maybe steam cleaned etc). Very carefully packed so as to not wrinkle the front pockets.

Good to know thanks, I guess I should have left them in haha