beardy3344

Does anyone out there own a pair of the 1930 cinch backs with the marbled weft? Really considering a pair, but am unsure on sizing. My past experience with Full Count is that they stretch and are cut a little on the generous side. I'm a 34 or 36 in most brands these days, but can still wait my size 33 1101's. Any assistance is appreciated!

Here you go, dude. S2000-RR tagged Size 35. Flat measurements. PRE WASH Waist: 17.75" Front Rise: 12.25" Thigh (at crotch): 14" Back Rise: 15.5" Knee: 11" Hem: 10" Inseam: 33" (hemmed by 2nd) I was worried these would shrink too much, as the waist was a bit snugger than I'd hoped for a size 35. Samurai sizing has been all over the place the last couple of years, especially with their limited and special releases. Gave them a cold wash in my crappy top loader washing machine, and took them out before the final spin cycle to let them air dry. POST WASH + 12 HOURS OF WEAR Waist: 17.5" Front Rise: 11.66" Thigh (at crotch): 13.25" Back Rise: 15.5" Knee: 10.66" Hem: 9.66" Inseam: 31" (hemmed by 2nd) The waist was definitely a bit smaller right after the wash, but stretched back to pre-wash measurements pretty quickly. Not sure if this is typical for Samurai 15oz denim, as this is my first experience with their denim in this weight. They will never see hot water, ever, so hopefully they don't shrink any further in the waist. Maybe one day I'll post fit pics. Wouldn't hold my breath though.

Nothing like ordering up some WW2 repros on Pearl Harbor Day. Just hope they fit! http://global.rakuten.com/en/store/2nd/item/sj-s20003-rr/

Anyone have the Lot 44 Californian jeans? I've been eyeing them for a while now, but am confused by the fabrics & size chart. Some look to be sanforized, and some unsanforized. A lot of the current options aren't even listed on the size chart. I either need a 34 or a 36. I'd love to get measurements if anyone has a pair and doesn't mind posting. Was hoping they'd be 30% off, as they are part of one of the collections listed, but they aren't for some reason

Looking to sell my size 35 710-DMO's or trade them for a 36. They're a tad too tight in the hips and thighs for me. Hemmed to 84cms and lukewarm soaked for about 90 mins and worn lightly around the house for 5 days or so. Please PM if interested.

Gave them a lukewarm 90 minute soak w/ mild agitation and wore them most of the day yesterday. They felt a little tight at first, but were pretty comfortable by evening. I'd say there's some stretch there if you need it, especially in the waist. Mine won't ever see hot water and I'll probably hand wash going forward to avoid more shrink. Will post some quick fit pics later.

Looking good Broark! I keep stalking Denimio and Rakuten waiting for someone to restock these in a 36. Maybe one day...

My size 35 710-DMO have arrived & been tried on. They fit me pretty well pre-soak. There's room in the waist, so not too concerned about that. It's the thighs I'm worried about, as they are pretty much where I want them right now. I'm used to roomier fits (510XX), and wanted something a little tighter/slimmer anyhow. Might give these a lukewarm soak and see how they turn out. The details are insane, and aside from the gold top button, I really dig them. I took measurements, and they pretty much match the new Denimio size chart exactly. Waist: 89.5cm (could be 90cm easily if stretched) Front Rise: 30cm Thigh (at crotch): 32cm Inseam & hem will be off, as these were hemmed to 83cm by Denimio pre-shipment.

Agreed. They should have delayed shipment. I only had them hemmed because the measurements they sent me were ideal. Either way, it's their fault. Maybe I'll get lucky, and they'll still fit me ok.

I had my 710-DMO's hemmed... looks like they just cleared customs in New York, and should arrive tomorrow. Already concerned about needing to exchange the 35 I ordered for a 36. Just reached out to Denimio asking if they will accept an exchange due to the measurement discrepancy. It's kind of jacked up that they updated their size chart, and now a 36 has an even smaller waist measurement than the size 35 quote that was sent around to everyone.

Me too. I messaged them last week just to see if everything was still on track for the end of the month, and was told that the end of the month is still the plan.

Rolled the dice and pre-ordered the 3012 from 2nd. Went with a 36 after reading the feedback from others and checking post-wash measurements. I take a 34 in Samurai S510's, so hopefully the 3012's won't be too big. It seems like the 14.5oz denim shrinks quite a bit. Never really messed with a tapered cut before, as I have large-ish thighs. This will be my first TFH anything. Looking forward to their arrival! Also... Ben, really dig the pattern on that shirt.

Agreed on the arcs. Seam ripper can fix that one though. I stared at the Deminio pics for weeks before pulling the trigger and it was only the arcs that made me hesitant.

Max, your commentary pushed me over the edge. Preorder placed! This will be my first pair of 710's. I've got the 19oz & 21oz 510's in size 34, and opted for a 35 in the 710 cut. Got big thighs, which is my only worry.

Bmore in the house!