1fookntitefd

I’m looking for a riders jacket with a collar. Since I don’t have much experience with leather jackets what are some of the things I should be looking out for aside from fit?

Who makes a better leather jacket? Ironheart or Fine Creek leathers and why?

Will Self Edge be restocking any Flathead jeans in the near future? 

^ the US is fucked up....cars (and other "toys") for that matter are relatively affordable but healthcare is not! 

6 minutes ago, d-rew12 said:

Damn @1fookntitefd clean FD! Looks great. And @chicote clean truck as well!

Posted in the GB thread a while back, but my DR30 Skyline. No jeans in a while as this is taking all my money 

this car is super OG

Anyone know how much the inseam will shrink on my one wash pair if I tumble dry?  I could probably use a little shrinkage... 

This is my baby that I've owned for over 20 years and have spent countless time and money on: suddenly buying a few pairs of jeans doesnt seem so bad.

5 minutes ago, d-rew12 said:

You and me both haha. I tried at least haha, but just not meant to be, and the rise is just way too low for the other cuts. 

 

And it seems yours were more tapered them mine @1fookntitefd wish I had your pair haha but still too slim.

Haha i feel you. As it is these are going to be my office jeans. I’ll wear them with dress shoes and rock them maybe 1-2x a week. My RJBs are still my main pair.

I personally think that the 850r from the 90s was the best volvo

So I got my pair of 710s in the mail today from Pants Shop Ave (great service btw, I paid on Wednesday and got my jeans on Monday).

Here are the measurements for a tag size 38 x33 one wash:

waist 35.5 

front rise: 11.25

Back rise 15

thigh 13

knee 8.75

inseam 30 

hem 8 

this is the first pair of one wash denim I bought. I havent decided if i like them that much yet but will still keep... Ideally this pair would be about .25 inches wider throughout the leg and maybe half an inch ahorter in the hem but hoping they will stretch a bit. In terms of fit, these jeans remind me of Flathead 3002 But with a higher rise. At any rate I’m planning on making this pair my frequent wash jeans.

On 6/19/2020 at 7:24 PM, SmokeStackLightning said:

I went with my normal size of 34.

My pair is one wash, and I have warm machine washed them and have ran them in the dryer on low heat. 
No shrinkage what so ever. Just the typical tightening up but that relaxes shortly after wearing them. 

So TTS is the way to go? Does it make a difference if I buy one wash vs raw? I want to pull the trigger on a pair of 710s but am hesitant to buy a pair i never tried on before so want to be sure.. 

ok so need some advice on sizing on a pair of 710s: should i be sizing up TTS on a pair of one wash? What about raw?

^ thanks. I e-mailed Frans Boone.

On another note, Naoki from Pants Shop Ave got back to me with measurements on a pair in 38 x 34:

Waist - 90cm

thigh- 34 cm

knee - 22 cm

Surprised that the thigh measurements came out that wide...

^ Thanks. I'll shoot them a note...

Anyone know where I can buy a pair of Resolute?

I e-mailed Zabou but they said that they aren't shipping to the US right now. BIG is out of stock. Brogue doesn't have a size 38. Still waiting to hear back from Sapporo Base but have otherwise hit a dead end...

ok serious question guys. What's the point of having so many jeans that you don't have the time to even wear? I would think rotating between more than 3-4 pairs at any given point in time is "too much" since you probably won't see fades start coming in until after months/years of wear. I'm always tempted to buy more jeans myself (I'm eyeing a pair of resolutes, warehouse, and also another pair of Evisus) but can't justify it knowing that if I have denim ADD I won't be able to properly wear my existing stock. 

Bought a brand new pair of TFH 1002. Same tag size as my 3 year old 3002. The presoak measurements are virtually the same so uts going to be interesting to see how the post soak measurements compare 

5 minutes ago, lee porter said:

I think I’ve put the measurements on here a few pages back not sure if they are sanfonized of not I got the 36 I could have got the 35 and I got the 38 in the same in the 2000t without preshrunk I will dig out my jean and to some measurements and fit picture I’ve just been a bit busy doing my flat up at the moment the 2020 fit was nice around the waist and hip and thighs but was massive around the knee a bit like sinbad trousers I got them tapered at blue solider 

Can you also provide measurements for your 2000t no.1 ?

3 hours ago, lee porter said:

I’ve just got 3 pairs off buyee all with short inseams I got the no1 red 2000t in a size 40 tiger 2000t in a 38 and a tiger gatata the slubby ones in a 36 and they all fit well I’ll do some pictures when I get a chance 

Can you provide measurements on the 2000T in size 38? 

4 hours ago, cmo said:

Resolute 710 w38x34

one wash measurements 

Waist - 18inches across rear of waist band

Front Rise - 11inches

Back Rise - 15.5inches

Inseam - 31.5inches

Leg Opening - 7.75inches

Pretty perfect for myself.  So much more comfortable in the thigh than my w36 pair.  Waist not that much different but reckon it will stretch a bit.  
Hard to believe I have had these in w34, 36 and now 38 and all have fitted.  This pair is obviously the most comfortable. 

Do you have thigh and knee measurements? 

^ +1

17 hours ago, itsbenhere said:

Damn that left hand twill looks so good. I need to wear mine more!

Wear and post pics!

Is this for real? If so, where can I cop a pair of these non suede jdm arcs?? 

After wash #10