danii

CHIBA D.I.Y. SPRAWL

162 posts in this topic

SUPPLIERS ADDRESS BOOK:

 

http://extremtextil.de: DRESDEN/DE [etaproof, fidlock, ykk, polartec, cordura, cobra buckles]

http://fun-fabric.de: SOLINGEN/DE [fidlock, cordura]

http://technische-textilien-shop.de: BERLIN/DE / ran by BAGJACK [cordura, TEC-SYS 25mm slotted loops]

http://seattlefabrics.com: SEATTLE/OBVIOUSLY [ultrex, ykk]

http://pennineoutdoor.co.uk: BENTHAM/UK [ventile, thisulate]

http://sailrite.com: COLUMBIA/US [ykk, dacron]

http://rockywoods.com: LOVELAND/US [cordura, thisulate, schoeller]

https://www.baender24.de: DE [webbing, colourful plastic hw]

http://www.zpacks.com WEST MELBOURNE/US [cuben, climasheild]

 

[feel free to contribute, resources will be added as posted]

Edited by danii
31

Share this post


Link to post
Share on other sites

after intensive hunt and research after the ACRONYM used buckes we found out:

it's made by STOCKO/YKK group

reference no. 5230

made to order / MOQ: 30000 pieces.

MI_E34.jpg

Edited by danii
12

Share this post


Link to post
Share on other sites

Rockywoods have a crazy selection of rare fabrics. Lots of military contract overruns by tweave and schoeller, sometimes in crazy patterns. Lots of one-off laminate overruns too. Good intl shipping, will send samples. 

3

Share this post


Link to post
Share on other sites

This is quality content. Now if only I could sew, I would be set.

2

Share this post


Link to post
Share on other sites

I can't sew but I have money and a local Chinatown which is basically the same thing.

Edited by Igneousity
1

Share this post


Link to post
Share on other sites

Also I just want the supplier for S6-C fabrics, as basic as that is.

0

Share this post


Link to post
Share on other sites

1.png

 

AOKU:012303 (ANALOG–WARE CASE)

 

X-PAC VX07 polyant pencase was designed on request. Currently being tested for ultimate user experience, before product launch at AOKU SURPLUS OUTPUT STORE. Thank you all for pushing me to make it happen.

 

IMG_8552.JPG

FIG_1: CASE OPEN [branding inside /w unique unit no.]

 

3A.jpg

FIG_2: CASE MOUNTED CLOSED [Tec-sys/MOLLE aligned bands on the rear side with slotted loops]

 

IMG_8557.JPG

FIG_3: CASE SLAM-MODE OPEN [elastic bands allow the case to be worn on wrist for powerusers]

 

IMG_8553.JPG

FIG_4: CASE SLAM-MODE CLOSED

 

inside.jpg

FIG_5: INSIDE THE CASE [mesh small item zipper pocket on the inside / black divider seam will be replaced with blend-in thread on final product]

 

 

 

––––STAY TUNED®

(mods: will upgrade to superartisan when the store is ready, I hope teasing is ok when I am not making any money)

Edited by danii
31

Share this post


Link to post
Share on other sites

Holy shit that's rad. Make a travel documents folder :v

0

Share this post


Link to post
Share on other sites

faking sick Danii.  Check your pm  :)

Edited by Flipflop214
0

Share this post


Link to post
Share on other sites

as anyone sewn tyvek? How is it to work with? My intentions are to make a couple small pouches / folios. Maybe a tote. 

 

Im a bit of a materials newb, if I was to experiment and  make a tote, what would be a affordable material to get started on? Something that can withstand some rain.

 

Rip stop nylon? 

 

Application intent would be grocery bag / daily junk sack. 

 

Does anyone have any inspo on tech totes?

Edited by EG562
0

Share this post


Link to post
Share on other sites

as anyone sewn tyvek? How is it to work with? My intentions are to make a couple small pouches / folios. Maybe a tote. 

 

Im a bit of a materials newb, if I was to experiment and  make a tote, what would be a affordable material to get started on? Something that can withstand some rain.

 

Rip stop nylon? 

 

Application intent would be grocery bag / daily junk sack. 

 

Does anyone have any inspo on tech totes?

 

The SD Traveller stuff could be good. It's very basic, but made from cuben fiber and some lined with RF shielding

http://sdrtraveller.com/collections/pouches

0

Share this post


Link to post
Share on other sites

one of my artdirectors has exactly what you are looking for. it's portfolio, ring bound on one side, velcro closing flap on the other with tote bag handles. made from tyvek (hard one / not the ueg one). l guess its no different to sewing paper.

0

Share this post


Link to post
Share on other sites

After talking to Danii for abit I got convinced to post something that I finished not too long ago. (Full time Lurker here)

  • (CP1 / Grid Gaiter) constructed and put together by me.
  • Objective: was to refine / add on anything that I believed could have been possible on the CP1.
  • Materials used can be found on the first post.
  • Reference are all used from google search because
  • I do not own the CP1
  • I took up sewing a year ago in a casual self-taught manner
  • Overall I hope to encourage a few to go make something

logoy_zps3cjuacbd.jpg

(Thanks for the _Coded font suggestion Danii)

 

Untitled-3_zpsdv5lcckx.jpg

Overview

_ CP1 can be worn in 3 different adjustments to adapt with layering underneath the cloak to unrestricted motion.

(Worn in 1st adjustment (Closest to the body) Sorry did not have photos with more layering.

 

Untitled-2_zpssxhzmfft.jpg

_ Gaiter mode added: Velcro adjustment for fit

_Additional labeling and Sound Force Lock can be added

( I tried to add a hood at first and did not turn out so well so I scrapped it and done this instead)

 

Untitled-4_zpsldlfs1w3.jpg

_Mil Spec Webbing masked around the interope to strengthen it and to keep it's structure straight.

(to stop it from flapping around so much when moving the bag infront and the back.)

_D Ring added to make separation and closure of interope with ease.

(It just seems easier to  have a hold on it. to keep the flow of unzip / zip  steady using (one hand to keep the garment straight as you unzip it.)

_ A Pocket can be located to the right side to the all other accessories (Gaiter/ Gloves/ etc)

(Who does not like pockets right?

 

Things I wanted to add but unsure of

_ an additional pocket on the right chest

_ add a Interope on left side

_ add a Pocket at the center like the J36

Edited by dsxero
18

Share this post


Link to post
Share on other sites

Nice overview Chris! I've been a fan of your work for a while :)

1

Share this post


Link to post
Share on other sites

What would load bearing stength be on that joining? Static/dynamic loading in technical use?

Edited by jbob24
0

Share this post


Link to post
Share on other sites

bZvuq8P.jpg

 

First pass on the sewing operative, made a small stuff sack out of silnylon. 

Plenty more to come.

3

Share this post


Link to post
Share on other sites

you will not probably get the exact ribbon but when you get black noone will notice different woving structure

 

OPT.A: grossgrain ribbon 06mm @extremtextil

kanteneinfassband-ripsband-polyester-06m

 

OPT.B: visit local sewing accessories shop and see what they have there

 

PRO.TIP: get matching orange

0

Share this post


Link to post
Share on other sites

AOKU:202004 (TROUSER TENSION DEVICE)

aka belt MK–1 "NEED-NEW-BELT-FAST"

 

I was never fan of the heavy standard issue cobra belt because it's heavy and installation more painful than Windows 3.11 to NT upgrade. I made myself a 40mm webbing belt with simple plastic buckle, patch array, D-ring and tonal reflective parts. Currently being tested for ultimate user experience, before product launch at AOKU SURPLUS OUTPUT STORE.

 

1.JPG

FIG_01: Device overview / Patch holding D-Ring used for power tightening of the belt

 

2.JPG

FIG_2: Patch [item#:161607] removed

 

3.JPG

FIG_3: Reflective Seam hider [FLASH-ON]

 

4.jpg

FIG_4: Installed

 

––––STAY TUNED®

(mods: will upgrade to superartisan when the store is ready, I hope teasing is ok when I am not making any money)

14

Share this post


Link to post
Share on other sites

Agreed, I totally need an airport friendly belt as well. Where do we sign up?!

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • By unmen


      View Advert Handmade Base Layer
      Crafted from a soft, delicate and almost transparent korean fabric: 98% cotton, 2% viscose. Density 90 g/m².
      Common base layer's cuts under dark fashion terms: straight fit, long sleeves, raw edges.
      Great for layering or using as morning shirt for your GF. ^__^
      Hand wash or gently machine wash cold.
      Sizing:
      p2p — 48 cm
      back length — 78 cm
      sleeves — 75 cm
      note: fabric is very stretchy so it may fits different sizes.
      (body measurements: 176 cm tall, 73 kilos weight, chest 105 cm, waist 85 cm)
      Stock: black (1 item), brown (4 items), milk melange (4 items).
      More pics here: https://imgur.com/a/zXFwN
      Advertiser unmen Date 03/31/2017 Price $20.00 Category tops  
    • By unmen
      Crafted from a soft, delicate and almost transparent korean fabric: 98% cotton, 2% viscose. Density 90 g/m².
      Common base layer's cuts under dark fashion terms: straight fit, long sleeves, raw edges.
      Great for layering or using as morning shirt for your GF. ^__^
      Hand wash or gently machine wash cold.
      Sizing:
      p2p — 48 cm
      back length — 78 cm
      sleeves — 75 cm
      note: fabric is very stretchy so it may fits different sizes.
      (body measurements: 176 cm tall, 73 kilos weight, chest 105 cm, waist 85 cm)
      Stock: black (1 item), brown (4 items), milk melange (4 items).
      More pics here: https://imgur.com/a/zXFwN
    • By unmen


      View Advert Handmade Cargo Pants
      LAST PAIR AVAILABLE!
      *note: it's not under the terms of TECHWEAR: no shell fabric, no waterproof stealth zippers and so on. Just well made utility pants.
      Description.
      Military inspired cargo pants with vintage effect.
      Washed thick 100% cotton canvas.
      Eight pockets (two with common twisted zippers).
      Articulated knees.
      Asymmetric 4 cm. belt loops.
      Color: washed dark grey.
      Sizing.
      It is normal S size (28-29) or tiny M.
      It is normal S size (28-29) or tiny M.
      Waist (circumference) – 83 cm.
      1/2 waist at flat surface — 40 cm.
      Outseam – 96 cm.
      Inseam — 67 cm.
      1/2 hips – 30 cm.
      Leg opening – 15 cm.
      Model measurements: 167 cm. tall, 54 kilos weight.
       
       
      Advertiser unmen Date 03/31/2017 Price $45.00 Category bottoms  
    • By unmen
      LAST PAIR AVAILABLE!
      *note: it's not under the terms of TECHWEAR: no shell fabric, no waterproof stealth zippers and so on. Just well made utility pants.
      Description.
      Military inspired cargo pants with vintage effect.
      Washed thick 100% cotton canvas.
      Eight pockets (two with common twisted zippers).
      Articulated knees.
      Asymmetric 4 cm. belt loops.
      Color: washed dark grey.
      Sizing.
      It is normal S size (28-29) or tiny M.
      It is normal S size (28-29) or tiny M.
      Waist (circumference) – 83 cm.
      1/2 waist at flat surface — 40 cm.
      Outseam – 96 cm.
      Inseam — 67 cm.
      1/2 hips – 30 cm.
      Leg opening – 15 cm.
      Model measurements: 167 cm. tall, 54 kilos weight.