Jump to content

Shoes that look better with age...


kiya

Recommended Posts

• Boots conditioned + laces diy-waxed w/ otterwax ... ready for winter wear

• Took delivery of 6pairs of DarnTough ... best socks ever, IMO 264036DE-B437-4EBC-8622-1ADC340DC66C.thumb.jpeg.6be87a1ceab7ecae6dc57752d917f6ff.jpeg971A5FA1-90E1-47E7-8655-EDFFE6DC3089.thumb.jpeg.d952384f6e4dfecffc2bf469ad4022c3.jpeg

 

Viberg 146 “Ironworker”42BD3F49-1549-4DD5-9A27-3125CA91C22D.jpeg

Trickers Malton in C-Shade Goarse6EF378CB-F5F7-4CF8-90E6-A37155AA9A37.thumb.jpeg.4b98282b0622f00e552b312e23211359.jpeg

Viberg Nat. Bison on 1035 last X Stance socks0D170F78-638C-4DFC-ACB6-BA2CDBF5DED1.thumb.jpeg.da705f5061a3ecf2551061d73a5b4492.jpeg

Edited by BrownMetallic
Link to comment
Share on other sites

I don’t have the Roberts, but a similar model on the same last (I think) with a soft toe that was sold through a retailer called Zurick a few years back. I have no complaints. They are four years old now, have seen daily wear for at least 3 of those years, and are still going strong with little to no maintenance.

I really lucked out on theses. They had them on sale and I got them shipped for <$300

0F0F1A94-65D6-42E5-90B0-73AAB20A37D7.jpeg

Edited by Quoise1203
Link to comment
Share on other sites

13 hours ago, Quoise1203 said:

I don’t have the Roberts, but a similar model on the same last (I think) with a soft toe that was sold through a retailer called Zurick a few years back. I have no complaints. They are four years old now, have seen daily wear for at least 3 of those years, and are still going strong with little to no maintenance.

I really lucked out on theses. They had them on sale and I got them shipped for <$300

I remember that run. Nice score! 

Link to comment
Share on other sites

So, the guy who makes Grizzly boots is still making them but at his own shop, made to order.  He also used to work for White's.

At the fringe of the yoga-soy block of hipness on West Main sits a small, dusty storefront where one man makes boots with his own thick, ink-stained hands.

Cruz Albisu, an immigrant from the Basque region of Spain, has been practicing a time-honored but fading craft for decades. His main products are work boots for logging and other outdoor labor, but don’t pigeonhole him.

“I do dress shoes, sandals – anything!” Albisu says in his enthusiastic and heavily accented voice.

His shop, at 209 W. Main Ave. next to the new University of Washington center, is cluttered and jumbled with half-finished boots, shoe forms called “lasts,” antique stitchers and finishing wheels. The place looks nearly abandoned – the “open” sign hangs crookedly on the front door, the dusty front windows are mostly empty, and there is nothing like a front counter or entry point when you enter.

But look closely at the finished footwear among the mess. It is beautifully crafted. Calf-high black logging boots with rows of golden hooks. Blood-brown leather work boots with Vibram soles and gleaming eyelets. Roughside black leather Oxfords. Caulks and packs and “Romeo slippers.”

In a glass case sit two special pairs.

“This is elephant,” says Albisu, in a worn red smock stained from years of work. “This is shark.”

Near the front door sit shelves of work boots and Oxfords, bound for Japan. Albisu says he makes hundreds of pairs at a time for a Japanese wholesaler who came into his shop by coincidence 20 years ago.

In this respect, Albisu and his one-man enterprise are representative of Spokane’s custom shoe industry – a small but unusually strong segment of the region’s economy that is centered on White’s Boots, according to an economic analysis prepared last year. While this “footwear cluster,” as the analysis termed it, relies on loggers, construction workers, firefighters, farmers and others who depend on quality, custom footwear, it has also developed a significant international market that is fashion-oriented.

White’s, for example, sells about 35 percent of its boots overseas, in countries such as France, Russia and Japan, according to the 2014 analysis performed by business professors at Eastern Washington University for the Spokane Footwear Association.

Spokane’s cluster of custom shoemakers – also including Nick’s Custom Boots and JK Tailors and Custom Boots – is unusual outside the East Coast, the analysis said. It traces directly to Otto White, who came west and settled in St. Maries in 1902 and moved to Spokane in 1915.

“Handmade shoes are becoming a rarity,” the report said. “This is a unique cluster existing in only a select few states. There is a long history of businesses within this cluster in the Spokane area.”

White’s is the largest, and a handful of bootmakers have left employment there to go into business on their own, including Albisu.

When he tells his life story, Albisu can be a little fuzzy on the details – ages, years, numbers. But when he recalls his time at White’s, one thing is very clear, at least in his own telling: “I was No. 1 producer. I made nine pair of boots a day.”

Albisu came to America as a young man in his early 20s, working on ranches in California and Oregon. He moved to Spokane in 1970 to work at White’s, plying a skill he had learned as a teenager growing up in the Gipuzkoa province of the Basque region of Spain.

“No machine. All hand – everything,” he said, referring to his teenage apprenticeship. “One pair a day.”

He left White’s and set up his own shop in the early 1980s. Along the way, he earned his American citizenship.

In his shop, he displays letters of praise from customers, including a surveyor in North Carolina who bought three pairs of his boots, and who wrote: “If you don’t believe it, call me … and I WILL TELL YOU WHY YOU SHOULD HAVE CRUZ MAKE YOUR BOOTS!”

This customer included his phone number, which is no longer in service.

Albisu also has a giant carved grizzly bear looming over one side of the storefront, a reference to one of the names his business goes by: Grizzly Boot Co., a Montana company for which he has a franchise.

He works alone, and it’s hard to determine the scope or size of his business. He says – and has been saying for several years – that he hopes to bring in an employee or two and really kick up his production. He works long days, sometimes 14 or 16 hours, and he says he gets tired more quickly now that he’s older. He doesn’t reveal his age, but he is in his 60s.

“I pay my bills, but I want to produce,” he said.

He starts each pair of shoes with careful measurements: tracing each foot, measuring where the ball, instep and ankle fall, choosing color, style and leather. He cuts and stitches and soles them, and buffs them on the finishing wheels. The finished products start at roughly $450. In addition to hundreds of shoe parts, Albisu has several pieces of older shoe-making machinery, from stitchers to jacks.

Inside his shop, the air is still and warm – it can feel stifling in the recent triple-digit heat, but Albisu doesn’t mind it.

“I like it hot,” he said. “It’s free now. It costs nothing. In wintertime, it’s not free.”

http://www.spokesman.com/stories/2015/jul/04/shawn-vestal-shoe-craftsman-embodies-spokane/

 

His Yelp:

https://www.yelp.com/biz/cruz-custom-boots-and-shoes-spokane

 

0704_boots1_t1140.jpg

Cruz-shoeshop_t1860.png

 

 

cruzz.jpg

cruz2.jpg

Edited by mlwdp
Link to comment
Share on other sites

Iv a question and I guess this is as good a place to ask .

ill be traveling to Tokyo soon and are after some Russell moccasin slip ons and chukkas, is there someone in Tokyo that has some inside knowledge as to who stocks them ?

cheers

Link to comment
Share on other sites

walnuts-shop.com carreis Russell Moccasin. It seems they get RM to make some custom models for them. I've spoken with Sue @ RM before about the JP market, and RM does a lot of work for different shops. She described the JP market as "much more fashion forward." The majority - it not 99.9% - of RM's stateside customer base is hunters, for either hunting or casual wear before and after hunting. I don't know for certain, but I do think that their level of quality for the JP market is better than for the domestic market. At least in my experience, my boots were pretty rough around the edges and quite wabi-sabi. RM would probably say differently. I also suggest doing a search on IG for RM - there are several JP shops that posts pics of their RM stock. 

Link to comment
Share on other sites

Thanks for the link mpukas but it is an online store , what I'd like to do is try some on for sizeing , iv seen too many mixed opinions on sizeing down/up or staying true to size .

where I live it's a $100.00 exercise if you need to exchange so while I'm already going to Japan I'll scope out stores there .

Link to comment
Share on other sites

Walnuts does have a physical store, but I don't know where it is. I can't find their address on their site, but didn't look very hard... 

Sizing is tough with RM. They made 3 different attempts for me, and sent me several pair to try on, before I finally got a fit that works for me. But what I'm looking for is very unique. They were very very nice and accommodating to work with. I ended up sizing down a 1 1/2 with their boots made on a Munson last, and they are 3EEE wide at the ball of the foot. 

Link to comment
Share on other sites

Thanks red dragon ! Exactly what I'm looking for , they have the chukkas I'm after as well and if they aren't in stock l can at least try others on to get my fit .

cheers 

Link to comment
Share on other sites

X post, apologies didn't know which thread was more appropriate 

1 minute ago, Geeman said:

Any experience and/or sizing advice for Sanders Playboy Chukkas? Fancy a change from desert boots.

 

Link to comment
Share on other sites

Sugarcane LoneWolfBoots WIREMAN @5yrs of steady 2-3days per week of wear @work.

Initially, I thought the aesthetics seemed a bit stiff ... as with most monkey boots construction, IMO. The starkness of the solid glossy black “glass” leather made [that] perception even more so.

But, as the boots break in, the wear became so much comfortable. The leather gradually became more pliant ... draped like impregnable gloves ... & maintaining is almost nil.F2591BAD-47EB-4D4B-A385-5ECC545DCD34.thumb.jpeg.d3212c98040adf06f37644735f7f9f44.jpegF3CDB23F-A49B-4DE8-ABDA-664A81815D4F.thumb.jpeg.df366502a952ca2fe7a29935e3b7e01e.jpegAAA8D7C5-7E7F-4D98-AF4F-2FC71AB50AD8.thumb.jpeg.e1143a6e93452e0b4b7fada2ae1c30b2.jpeg

 

After some cleaning & brushing:17194511-0CAA-4EF5-BFA2-DFB44CA19232.thumb.jpeg.be6d0958c7d4337bd89e694299c9ebd5.jpegD501AE60-DA9B-4C68-B7F8-72D96ED1227B.thumb.jpeg.f136ebbf0a4eb6ce38c9a712a39380b8.jpegC5166236-05BD-4B55-B313-3CBB8EE0C85F.thumb.jpeg.64d9a7ec246045ab527f4355c625707c.jpeg

Edited by BrownMetallic
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...