Jump to content

White's Horse Hide/Shell Cordovan group order


fre-co

Recommended Posts

Was disapointed about hh, but i still want some vibergs.

Did some research about what i exactly want.

So i'm in again and until the end :)

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer with standard toe, black horsehide, single midsole with watered down brown edge (like take 5 service boot with top edge painted as well), Vibram 705, brass roller buckles, no celastic toe, no lining, brown stitching on uppers, logo on front, pull strap, cuban heel, Quabaug heel

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black Horse Hide, Double Midsole Leather Natural color , 50's Toebox, 10" high, no lining , Silver roller buckles, Quabaug heel , Cuban heel

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,double midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cuban heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.wordpress.com/2010...w-last-sample/) w/50's toe (no reinforcement), close welt, no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

Link to comment
Share on other sites

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer with standard toe, black horsehide, single midsole with watered down brown edge (like take 5 service boot with top edge painted as well), Vibram 705, brass roller buckles, no celastic toe, no lining, brown stitching on uppers, logo on front, pull strap, cuban heel, Quabaug heel

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black Horse Hide, Double Midsole Leather Natural color , 50's Toebox, 10" high, no lining , Silver roller buckles, Quabaug heel , Cuban heel

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,double midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cuban heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/newlast1.jpg) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

Link to comment
Share on other sites

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer with standard toe, black horsehide, single midsole with watered down brown edge (like take 5 service boot with top edge painted as well), Vibram 705, brass roller buckles, no celastic toe, no lining, brown stitching on uppers, logo on front, pull strap, cuban heel, Quabaug heel

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black Horse Hide, Double Midsole Leather Natural color , 50's Toebox, 10" high, no lining , Silver roller buckles, Cats Paw, Cuban heel

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,double midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cuban heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

Link to comment
Share on other sites

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer with standard toe, black horsehide, single midsole with watered down brown edge (like take 5 service boot with top edge painted as well), Vibram 705, brass roller buckles, no celastic toe, no lining, brown stitching on uppers, logo on front, pull strap, cuban heel, Quabaug heel

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black Horse Hide, Double Midsole Leather Natural color , 50's Toebox, 10" high, no lining , Silver roller buckles, Cats Paw, Cuban heel

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,double midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/newlast1.jpg) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

Link to comment
Share on other sites

no its extended till i approve the horsehide sample!

When are you expecting that to be Ed?

I need to sort a few things out, but i would love to join this group buy eventually.

Are there still going to be 3 runs in total like you mentioned before?

Link to comment
Share on other sites

It took me two days to get through all 52 pages...finally.

Although, I am finally able to access SuFu, I am not able to view photos you all are uploading (viberg site is out as it is considered a restricted site on my government computer...until after 8:00pm). That said, I have no idea what certain options look like - specifically, 50's toe box (Engineer Boots). Can anyone help me out with a photo? My Afghanistan work e-mail address is:

[email protected]

I don't think I'm steering away from the Road Champs when I return, but am curious to know what a pair of custom Viberg Engineer's would look like. Especially after reading the disconcerting info on Julian's craftsmanship, practices and the potential for his footwear being produced south of the border.

Ed, would it be possible to find out if stacked (say...one or two lifts) Quabaug Cuban heel and extra length (two inches) on the instep strap be an option?

Cheers!

Link to comment
Share on other sites

Using Ray's boots as a foundation... (thanks Ray!)

Ed, can you let me know if this is going to be more than eight bills? I've got my eyes on another gem. If under eight, count me in.

Marineabilly --- Size 8D Engineer Boots, 9", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lifts, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca/officialgallery/wp-content/uploads/2010/09/service-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqFg/TE-ZUitUN0I/AAAAAAAAC8M/oDVYZ5-0YAw/s1600/VB.jpg, No Lining.

Cheers!

Link to comment
Share on other sites

Nice choice Marineabilly. I took the liberty of adding you to the list with your specs. And I'm tempted to steal some of your ideas (I didn't know we could do the perf on the edges like in the western sample!).

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer with standard toe, black horsehide, single midsole with watered down brown edge (like take 5 service boot with top edge painted as well), Vibram 705, brass roller buckles, no celastic toe, no lining, brown stitching on uppers, logo on front, pull strap, cuban heel, Quabaug heel

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black Horse Hide, Double Midsole Leather Natural color , 50's Toebox, 10" high, no lining , Silver roller buckles, Cats Paw, Cuban heel

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,double midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 9", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lifts, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining.

Link to comment
Share on other sites

I was under the impression that the cuban has that curvature.

Link to comment
Share on other sites

Nice choice Marineabilly. I took the liberty of adding you to the list with your specs. And I'm tempted to steal some of your ideas (I didn't know we could do the perf on the edges like in the western sample!).

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer with standard toe, black horsehide, single midsole with watered down brown edge (like take 5 service boot with top edge painted as well), Vibram 705, brass roller buckles, no celastic toe, no lining, brown stitching on uppers, logo on front, pull strap, cuban heel, Quabaug heel

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black Horse Hide, Double Midsole Leather Natural color , 50's Toebox, 10" high, no lining , Silver roller buckles, Cats Paw, Cuban heel

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,double midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.com/2010/08/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 9", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lifts, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining.

Hi Ed--I'm ready to be number 14. In for a pair of Engineers just about identical to marinabilly's, without longer top strap as well, and no logo. Only need to figure out size. Same as my size in White's SD and Alden Indy's (9.5 D in both)? Thanks!

So...

14. bove 9.5 D? Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

Thanks!

Link to comment
Share on other sites

1. demonito --- engineers, blach hh, double midsole leather natural color , 50's toebox, 10 " high, no lining , silver roller buckles, quabaug heel , cuban heel

2. headsistails - Size 8.5 E, 9" Engineer, horsehide with no lining, standard toe with no reinforcement, single midsole with watered down brown edge (like take 5 service boot with top edge of midsole painted as well), cuban heel, Vibram 705, brass roller buckles, brown stitching on uppers, logo on front, pull strap

3. Madmax - size 10,5 EE, 9" Engineer with standard toe, Black Horsehide, Single Midsole Natural, Vibram 705, brass roller buckles, no celastic toe, close trim sole.

4. Aquaphor - Service boot(slim new style), Black Horsehide, Single Midsole Natural finish, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Cut Top, All antique eyes.

5. ADH92 - Size 11.5D - Engineers, Black Horse Hide, Double Midsole Leather Natural color , 50's Toebox, 10" high, no lining , Silver roller buckles, Cats Paw, Cuban heel

6. Aso2004 - 9 EEE Nailed down Service boot, Black Horsehide, Single Natural midsole, Vibram 705 sole, Cat's Paws Heel, Unlined interior, Rolled Top, Brass eyelets. Capped toe ( no brogue), Block Heel, Pull tab

Basically this one in black with the extra's http://vibergboot.wordpress.com/page/7/

7. BrownMetallic__ 8.5EE *** 5" Service boot (Cap Toe w/ Celastic), Black Horsehide, Single Midsole Natural finish, Vibram 705 half-soles + Cat's Paws [block heels], unlined interior + cut top, All Nickel eyelets.

8. Pistol --- 8 inch engineer, black hh, Single Midsole Natural, Vibram 2021 sole(Sand color), 50's toebox, no lining, Rolled Top, pull strap on back, Brass roller buckle, no logo (if possible).

9. akiyama71--- size 8.5D 7 inch service boots with worker toe, capped toe, black horsehide,double midsole leather natural color, a smaller welt size or single stich, nickel eyelet with speed hooks and the top most to be eyelet, no inner lining, rolled top, pull tab, vibram 435 half sole with quabaug heel , cuban heel.

10. rayw44 --- Size 8.5D 10" Engineer boot, black horsehide, double leather sole in natural (1 piece for the midsole, 1 for the sole), cat's paw heel, brass roller buckles, the new service boot last (as seen here http://vibergboot.files.wordpress.co...8/newlast1.jpg but NO toe cap) w/50's toe (no reinforcement), smaller welt (if possible), no lining, no pull straps, yes to logo, straps on top and bottom 3" longer, brown stitching on uppers (if possible).

11. Pwing-- size 10.5EE 155 smoke jumper,black hh,vibram 700 composition full sole and oil resisting heel

12. mctaran -- Service boot, 7oz brown mocha leather (like on the link), upturned toe, gunmetal eyelets and hooks, standart heel, natural edges, single leather midsole, vibram 269 sole, vibram heel, leather laces (x2 if possible), Exactly this boot but with eylets and hooks

http://www.wretch.cc/blog/cherryjuice/26584191

my size in RW GT and White's packers is 8D, guess will do some feet tracing to figure out viberg size.

13. Marineabilly --- Size 8D Engineer Boots, 9", Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lifts, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps two inches longer. Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining.

14. bove 9.5 D? Black Horsehide, Double Leather Soles with dyed brown edges (1 piece for the midsole, 1 for the sole), Cuban heels, Cat’s Paw heels, One (1) extra heel lift, Brass Roller Buckles, the new service boot last (as seen here: http://www.canadiandesignresource.ca...vice-boot1.jpg , but with NO toe cap, of course and no toe reinforcement), Regular Double Stitch Welt with White Stitching, Instep Straps and upper straps two inches longer, no logo, Perforated Heel Counter and Upper Vamp like this: http://4.bp.blogspot.com/_1Sr7EddpqF...w/s1600/VB.jpg, No Lining

Link to comment
Share on other sites

From user headsistails:

"The (Viberg) sizing for me was true to size...except for the width since their E width fits like a US D."

Can anyone validate this statement? My custom Whites SD's are 8D; therefore, I ordered the same Viberg size. Do I need to update my size to 8E based on the above info?

My Viberg engineers are an 8 1/2D, and they fit me perfectly. I typically take an 8 1/2D in boots (particularly in White's SD), so I don't think this is actually accurate.

Link to comment
Share on other sites

My Viberg engineers are an 8 1/2D, and they fit me perfectly. I typically take an 8 1/2D in boots (particularly in White's SD), so I don't think this is actually accurate.

I would email them just to see, but I'm almost positive that's what I was told when I was sizing mine and my E fit like a D. I wear a D in almost everything else too. However I was sizing the short shift w/ packer toe which may fit differently than the engineer....

Link to comment
Share on other sites

I would email them just to see, but I'm almost positive that's what I was told when I was sizing mine and my E fit like a D. I wear a D in almost everything else too. However I was sizing the short shift w/ packer toe which may fit differently than the engineer....

That could be a distinct possibility. My toe is the standard engineer, not the more narrow packer.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...